Deleted
Posts: 0
May 2, 2024 23:34:27 GMT
|
Post by Deleted on Jun 5, 2020 19:12:22 GMT
I've tried just about everything to keep my glasses from fogging up. I was about to buy some anti fog spray despite the poor reviews, but read about folding up some tissue and placing it between the bridge of your nose and your mask. It worked! Give it a try if you are having problems as well.
|
|
|
|
Post by Crack-a-lackin on Jun 5, 2020 19:19:07 GMT
Is this for masks without the metal nose bridge, or do you find you need it even with the metal?
|
|
Deleted
Posts: 0
May 2, 2024 23:34:27 GMT
|
Post by Deleted on Jun 5, 2020 19:23:27 GMT
I needed it despite the metal nose bridge.
|
|
|
|
Post by newscrapper05 on Jun 5, 2020 19:36:56 GMT
Thanks! Like you I've tried everything. I have 'some' luck if I put my glasses on the outside of the mask. I had tried the kleenex trick but I was putting it between my nose and the mask. I'll try this way.
|
|
moodyblue
Drama Llama
Posts: 6,173 
Location: Western Illinois
Site Supporter
Jun 26, 2014 21:07:23 GMT
|
Post by moodyblue on Jun 5, 2020 19:44:42 GMT
One thing I’ve found helpful is to try to breathe like you’re playing the flute, so the air goes down and not up.
|
|
Deleted
Posts: 0
May 2, 2024 23:34:27 GMT
|
Post by Deleted on Jun 5, 2020 19:49:33 GMT
I use about two squares of toilet tissue and put it at the bridge like in this photo:  |
|
|
|
Post by mikewozowski on Jun 5, 2020 19:51:01 GMT
i read something about cleaning your glasses with shaving cream, but i havent tried it.
|
|
|
|
Post by chaosisapony on Jun 5, 2020 20:55:10 GMT
I will have to try that with tissue. I'm so glad you posted that tip! I refuse to try shaving cream or anything chemical based as I pay for expensive anti-reflective coating on my glasses and that stuff can really wreak havoc on lens coatings over time.
|
|
|
|
Post by flanz on Jun 5, 2020 21:02:39 GMT
I use about two squares of toilet tissue and put it at the bridge like in this photo: That's an image of the front of the mask? |
|
milocat
Drama Llama
Posts: 5,421
Location: 55 degrees north in Alberta, Canada
Member is Online
|
Post by milocat on Jun 5, 2020 21:44:28 GMT
I will have to try that with tissue. I'm so glad you posted that tip! I refuse to try shaving cream or anything chemical based as I pay for expensive anti-reflective coating on my glasses and that stuff can really wreak havoc on lens coatings over time. Shaving cream works for bathroom mirrors but I would also be leary of putting it on my glasses I pay so much for them I can't afford to damage them. |
|
Deleted
Posts: 0
May 2, 2024 23:34:27 GMT
|
Post by Deleted on Jun 5, 2020 22:34:52 GMT
I use about two squares of toilet tissue and put it at the bridge like in this photo: That's an image of the front of the mask?
The tissue side should face you and sits between you and your mask. It serves as a barrier and prevents moisture/air from escaping through the top of the mask. |
|
|
|
Post by ScrapbookMyLife on Jun 5, 2020 23:52:47 GMT
I saw posts on facebook, to use shaving cream.
I tried it and it worked for me. It may fog for a second or two, but then it instantly goes away.
I wet glasses, put thin layer of shaving cream, rinse, then dry. I usually do it every other day.
|
|
|
|
Post by bothmykidsrbrats on Jun 6, 2020 0:53:11 GMT
I've been using shaving cream since I started wearing glasses 10 years ago. Gel seems to work a little better than the white foam.
|
|
