|
|
Post by KikiPea on Jul 17, 2016 16:46:40 GMT
I have looked at Michael's and Hobby Lobby, and can't seem to find them.
|
|
JustTricia
Pearl Clutcher
Posts: 2,829 
Location: Indianapolis
|
Post by JustTricia on Jul 17, 2016 16:49:59 GMT
I bought mine at HL in the model section.
|
|
|
|
Post by stinkerbelle on Jul 17, 2016 17:07:28 GMT
I got mine at HL in the aisle with model cars. you can also get them on amazon.
|
|
|
|
Post by KikiPea on Jul 17, 2016 17:11:35 GMT
Ah, just didn't look in the right place. Thanks, ladies!
|
|
|
|
Post by anniefb on Jul 17, 2016 19:45:48 GMT
I'll be having a look on Amazon I think. Was wondering where on earth I could get one.
|
|
|
|
Post by wonderwoman on Jul 17, 2016 21:25:38 GMT
Yes after 2 trip to Hobby Lobby I found them in the models area..
|
|
|
|
Post by AngieandSnoopy on Jul 17, 2016 22:27:07 GMT
I don't live close to anywhere to buy these and the last time I was at Hobby Lobby (80 miles away), I couldn't find the bottles. I bought mine at Walmart.com since I got free shipping. I got the small and large below, the large fits my Aleenes Acid Free glue bottle and I put the smaller one on another bottle so I could have a small bottle with Aleenes in it. I like it and each come with two sizes of tips to use. Since my glue had gotten a tiny bit thick because of it being open AND I live in a dry climate, I added a tiny bit of distilled water to thin it out a bit. I do a lot of pop up cards that need a strong but TINY bit of glue and this works perfect for me. And I bought all this glue 3 years ago, the last time I was at a Michaels in El Paso. ScraPerfect No Clog Writing capHere are two sizes of another one some people like. Fineline 18 gaugeFineline 20 gauge |
|
|
|
Post by myboysnme on Jul 18, 2016 1:24:55 GMT
Is this something I could pour my nuvo drops in since the cap is ruined on mine?
|
|
|
|
Post by nitad on Jul 18, 2016 4:48:43 GMT
I have the scrap perfect tip and I have never been able to get it to work. It takes so much pressure to get the glue out. I just at gave up. What am I doing wrong??
|
|
|
|
Post by stinkerbelle on Jul 18, 2016 15:51:56 GMT
Is this something I could pour my nuvo drops in since the cap is ruined on mine? I had that thought too because I have one bottle that has a giant hole in the side of the applicator tip (my fault not theirs). I have an extra bottle, also a set of just the caps...if I get around to doing it I'll let you know how it goes! |
|
|
|
Post by jemmls4 on Jul 19, 2016 1:16:48 GMT
I was just looking for these! I was at HL and looked everywhere (including model area) and couldn't find them. While this is what I want, I cannot buy it because the packaging says "never loose your cap again". I am a militant grammar nazi. |
|
nicolep
Drama Llama
Posts: 7,080
|
Post by nicolep on Jul 19, 2016 17:49:13 GMT
Can one of you ladies shed some light on what this is used for? I am interested! Is it a sort of 'universal' applicator for our different glues and for adhering intricate items?
|
|
|
|
Post by KikiPea on Jul 19, 2016 22:36:00 GMT
Can one of you ladies shed some light on what this is used for? I am interested! Is it a sort of 'universal' applicator for our different glues and for adhering intricate items? I've heard it just makes it easier to put your regular embellishment glue on very small, thin lined items. It should keep it from globbing out of the tip. |
|
|
|
Post by AngieandSnoopy on Jul 20, 2016 3:38:18 GMT
I have the scrap perfect tip and I have never been able to get it to work. It takes so much pressure to get the glue out. I just at gave up. What am I doing wrong?? I turn it upside down and shake it to get it to the top before I start squeezing the glue out. Do NOT store it upside down. I make sure if it has a bit of dried glue at the tip to pull it off first. Depending on what you are using, paint or glue or whatever, you might need to at least start with the biggest metal tip. I was using a bottle of Aleenes Acid Free glue that had been opened for a LONG time so I put a tiny bit of distilled water in the glue and shook it good and let it settle before I tried using the first time. I could tell my glue was a little thick. I haven't had any problems since UNTIL I accidentally had it stored upside down. As I said, I have the largest version and the smallest version and have had good luck with them. You do have to pull dried glue out of the tip most times. It isn't much and comes off easy. I live in a DRY climate. |
|
nicolep
Drama Llama
Posts: 7,080
|
Post by nicolep on Oct 3, 2016 15:27:02 GMT
I am revisiting this thread because I'd like to buy some of these bottles to use with my Cameo titles and intricate designs. Can some of you link me to the ones you recommend? I saw the link to the Precision Tip one from jemmls4 and I like how the cap is connected. I searched on Amazon as well and there are a LOT but I'd like a recommendation from you ladies. Also, can you put any kind of glue you'd like in these bottles? Is this something I could pour my nuvo drops in since the cap is ruined on mine? I am also curious about this. It would be awesome if so! |
|
nicolep
Drama Llama
Posts: 7,080
|
Post by nicolep on Oct 3, 2016 15:45:02 GMT
Also...is there a reason to have this many different sizes? |
|
scrappington
Pearl Clutcher
in Canada
Posts: 3,139
|
Post by scrappington on Oct 3, 2016 15:52:20 GMT
I bought mine from Simon Says Stamp. I use them for Matte medium only.
I don't leave the lid off for long though. I really haven't had any issues with trying to get glue out.
|
|
Deleted
Posts: 0
May 19, 2024 12:38:59 GMT
|
Post by Deleted on Oct 3, 2016 17:09:21 GMT
I bought this one on Amazon for about $2.5 and put Tombow in it. So far, so good. I'll let you know if it dries out or has other issues. Lychee 30 ml |
|
|
|
Post by papersilly on Oct 3, 2016 17:40:58 GMT
I bought my Precision Tip bottle from Amazon because I didn't know about the model section at HL.
|
|
|
|
Post by anniefb on Oct 3, 2016 18:29:36 GMT
|
|
