|
|
Post by pas2 on Mar 22, 2017 13:31:35 GMT
I want to make stencils to use on paper like the Tim Holtz style and weight. What material do you use for making them? I tried the plastic indexes for notebooks but they seemed to thin, but cut great for intricate patterns. Tried plastic file folders but they were a tad to heavy and I had a tiny bit of trouble with them cutting on one edge. I'm not sure they would work great for the fussy cuts. I have some stencil blanks I bought at HL but haven't tried them yet. Has anyone found a good weight plastic for this kind of stencil?
|
|
|
|
Post by chrispeas on Mar 22, 2017 13:42:50 GMT
How about quilters template plastic?
|
|
scrapnnana
Drama Llama
Posts: 6,144 
|
Post by scrapnnana on Mar 22, 2017 14:25:46 GMT
I've cut stencil blanks with my Cameo, no problem. It's been awhile, and I can't remember if I used a stencil setting on the Cameo, or just did a trial and error.
I have not used any of the Tim Holtz stencils, so I don't know how they would compare, but the stencil blanks did seem to be somewhat similar to stencils that I bought at the LSS. Not exact, but similar. I am familiar with Tim Holtz techniques. I think the cut stencil blanks would work fine for that. Since you already have some stencil blanks, try cutting them with your Cameo and a detailed design. See if they work for the Tim Holtz techniques. They should.
|
|
|
|
Post by grammadee on Mar 22, 2017 14:45:26 GMT
How about quilters template plastic? Where would I get some of this? I have been playing with the idea of creating stencils with my Cricut, and looking for a plastic that will cut easily but last longer than one use as a stencil. |
|
|
|
Post by htstepper on Mar 22, 2017 14:46:26 GMT
Silhouette makes a reusable stencil material. I have it here, but sadly, it is sitting in the package still, waiting to be crafted with. Grafix also makes one that is pretty affordable. I have never tried, but I remember reading about someone who liked it. You would have to experiment with it though: amzn.to/2n7jMdW |
|
|
|
Post by pas2 on Mar 22, 2017 15:08:11 GMT
Thank you. I'm always looking for an inexpensive alternative since I want to cut quite a few stencils.
|
|
loco coco
Pearl Clutcher
Posts: 2,662
|
Post by loco coco on Mar 22, 2017 15:10:54 GMT
how have I never thought about making my own stencils?? seriously, this is genius! I was just looking at stencils to buy and the designs were meh. Thanks for posting this!!
|
|
|
|
Post by jloubier on Mar 22, 2017 15:29:24 GMT
I have bought a package of 6 blank plastic stencil sheets at Wal-Mart for just that purpose but have been too afraid to attempt cutting them on my Cameo. I'm not sure what setting to use. I'm quite new to the whole Cameo thing. I'm still trying to figure out the setting for cutting different types of papers. The paper weight of different manufacturers is a mystery to me.
|
|
|
|
Post by moraie on Mar 23, 2017 1:36:42 GMT
Cricut and silhouette both make template plastic. Most of the big boxes carry it in store, Joann's has it online. You can buy quilt template blanks from Joann's too, sometimes they're fairly heavy though. Personally, I use frosted Duralar. You can get it at Michael's w a coupon where they keep architectural pens, tsquares, etc. It's a lot lighter weight and much easier on the cutting blades, but will hold up for several uses.
|
|
Deleted
Posts: 0
May 16, 2024 22:07:30 GMT
|
Post by Deleted on Mar 24, 2017 6:17:16 GMT
How about quilters template plastic? Where would I get some of this? I have been playing with the idea of creating stencils with my Cricut, and looking for a plastic that will cut easily but last longer than one use as a stencil. Hobby Lobby has it in the sewing accessories. JoAnn's carries there in with the quilting accessories. You can cut it on the Cricut if you get it on the thin side. If you get quilting templates on the heavier side you can make your own Cameo & Cricut mats. Been doing that for years since I had a Wishblade. WalMart sometimes carries quilting template but my store hasn't in a long time. WalMart- If you look in the area where they sell the decorative paints (Apple Barrel, Folk Art) you can find stencil material. It cuts nicely on the Cricut. You will need to do a double cut. Hobby Lobby also has blank stencils. I also have used heavy acetate on the Cameo. I did a double cut and it worked beautifully. I did this using the CB09 blade holder. This blade holder was created for heavier materials. I can't say if heavy acetate works on the regular Cameo stock blade holders. I did a double cut. Heavy acetate on the Cricut (all versions) only one cut but double check before you remove the mat in case you might have to do a double cut. If you need temporary stencil for a one time usage contact page works great for both cutters.. Scan n Cut owners I didn't forget you. Try all the above recommendations. Zing, Sizzix & Black Cat users you will have no problem with any of the stencil materials. You already knew that.  Oh, I almost forget if you need something a bit more heavy duty try styrene. Styrene is your For Sale/Garage Sale sign material. Cameo does choke on that material. Cricut cuts it wonderfully. Scale modelers use it for model and stencil making. I buy blank sheets of it online for my modeling. I make a lot of stencils on my machines. I hope that helps. |
|
|
|
Post by pas2 on Mar 24, 2017 12:28:03 GMT
amayalylac Wow, thanks for the information. I'm coming to you for all my stencil questions from now on!
I did try a very intricate cut stencil (most cuts the size of a pin head) on the plastic NB dividers. I applied ink over it and the image came out nicely. I taped the stencil down because it was so light but the cut pieces didn't pull up when rubbed across. I am pleased because these are so inexpensive. I think the heavier template material would be desirable if I wanted to use texture pastes but I plan to use inks. I definitely will have to look into the CB09 blade holder, I feel that all this cutting on plastic will dull the regular blade quickly.
Now I want to know everyone's tips for getting all that plastic OFF the cutting mat after the stencil has been removed? It doesn't come off as easily as paper does that's for sure. I resulted to scrapping it to loosen it then trying to pick up as much as possible with a lint roller!
|
|
|
|
Post by tinksmommy on Mar 24, 2017 22:23:45 GMT
Cricut and silhouette both make template plastic. Most of the big boxes carry it in store, Joann's has it online. You can buy quilt template blanks from Joann's too, sometimes they're fairly heavy though. Personally, I use frosted Duralar. You can get it at Michael's w a coupon where they keep architectural pens, tsquares, etc. It's a lot lighter weight and much easier on the cutting blades, but will hold up for several uses. I ran out and bought some Duralar right after I read your post. What settings do you use to cut the plastic? Thanks so much! |
|
|
|
Post by moraie on Mar 25, 2017 4:24:45 GMT
tinksmommyI usually use a 4.5-5, and I almost always double cut but use a slower speed. Sometimes I have to adjust it a little depending on how old my blade and mat are. Start with a small shape just to make sure you have the right depth, like a 1" square, circle or rectangle, and then try a smaller design that you can repeat without wasting a ton of time or mylar. You'll be able to tweak your settings pretty quick! And, Duralar's pretty amazing for all sorts of scrappy things once you start playing with it. 
|
|
|
|
Post by rhhdk on Mar 25, 2017 15:58:05 GMT
My DD have with succes used pockets for lamination of paper (ran it through the laminator before cutting)
|
|
