|
|
Post by scrappypeanut on Aug 29, 2021 0:11:47 GMT
These are OLD silhouette files/images like 2011!
I used to know this font, but whe I lost my computer to crash it lost all this older stuff.
Here are some pages (word February in this layout)
and the word April in this layout
I tried what the font but because it uses a cross between upper and lower case, it couldn't ID it accurately.
Anyone remember the font match? These were very popular back. Man am I old.
|
|
breetheflea
Drama Llama
Posts: 6,549 
Location: PNW
|
Post by breetheflea on Aug 29, 2021 2:01:37 GMT
Are you sure it's a font and not just a cut file? I did some Googling and if you look up "outline word" in the Silhouette store a bunch of Loni Stevens pre-welded words pop up. If you ad "outline word" + name of a month some of the months of the year, but not all pop up in that font.
I remember watching Nichol on the old Two Peas, talk about memory lane with those layouts!
|
|
scrapnnana
Drama Llama
Posts: 6,449
|
Post by scrapnnana on Aug 29, 2021 2:25:26 GMT
Back when these were popular, I tried to find the font, but never did. I ended up deciding that they had offset font characters, then welded them for those words.
|
|
|
|
Post by scrappypeanut on Aug 29, 2021 3:20:23 GMT
Back when these were popular, I tried to find the font, but never did. I ended up deciding that they had offset font characters, then welded them for those words. Yup, she did. It was a specific font (or one almost identifical), because I created so many more words in that style :-). Stupid computer crash  |
|
|
|
Post by Linda on Aug 29, 2021 3:44:30 GMT
|
|
PaperAngel
Prolific Pea
Posts: 7,980
Jun 27, 2014 23:04:06 GMT
|
Post by PaperAngel on Aug 29, 2021 5:34:36 GMT
|
|
|
|
Post by scrappypeanut on Aug 29, 2021 17:45:01 GMT
Thank you! Playing with that prompted my oxygen deprived brain! I have a font poland can into that is the perfect match! I cannot find the one I have online as it already has the outline built right into the font but that was it!
Thank you paperangel.
|
|
PaperAngel
Prolific Pea
Posts: 7,980
Jun 27, 2014 23:04:06 GMT
|
Post by PaperAngel on Aug 30, 2021 2:57:58 GMT
Thank you! Playing with that prompted my oxygen deprived brain! I have a font poland can into that is the perfect match! I cannot find the one I have online as it already has the outline built right into the font but that was it!
Thank you paperangel.
Glad you found the font you were seeking. While the Poland Can Into outline font (included in a free 8-font family download seen here) can certainly be welded to yield similar titles, it's not the same font used on the sample layouts in the OP. Note the angled lowercase f & r, plus the font was created in 2015, five years after the layouts were scrapped. Nichol Magourik's blog post for the April layout specifies the monthly titles were created by Loni Stevens for the Silhouette Store in 2010; all 12 months are still available at the Silhouette Store/Loni Stevens for $0.59-0.99/each (search by month). HTH. |
|
Loydene
Pearl Clutcher
Posts: 2,639
Location: Albuquerque, New Mexico
|
Post by Loydene on Aug 30, 2021 18:03:12 GMT
Steelhead Outline??
|
|
|
|
Post by scrappypeanut on Aug 30, 2021 20:02:55 GMT
Thank you! Playing with that prompted my oxygen deprived brain! I have a font poland can into that is the perfect match! I cannot find the one I have online as it already has the outline built right into the font but that was it!
Thank you paperangel.
Glad you found the font you were seeking. While the Poland Can Into outline font (included in a free 8-font family download seen here) can certainly be welded to yield similar titles, it's not the same font used on the sample layouts in the OP. Note the angled lowercase f & r, plus the font was created in 2015, five years after the layouts were scrapped. Nichol Magourik's blog post for the April layout specifies the monthly titles were created by Loni Stevens for the Silhouette Store in 2010; all 12 months are still available at the Silhouette Store/Loni Stevens for $0.59-0.99/each (search by month). HTH.
The one I have while it is labeled that in my machine has the outline already built into and is not the exact same as the ones you linked. Guess I have something different :-). So bizarre!
|
|
|
|
Post by bingaling on Aug 30, 2021 22:13:47 GMT
I have all 12 of those fikes (I did scraplifts of NMs layouts where she used them).
If you cut them out and have issues with how skinny some areas are, rotate the files 90 degrees. Mine cut so much better that way for some reason.
|
|
naby64
Drama Llama
Posts: 6,382
|
Post by naby64 on Aug 31, 2021 15:11:06 GMT
I have all 12 of those fikes (I did scraplifts of NMs layouts where she used them). If you cut them out and have issues with how skinny some areas are, rotate the files 90 degrees. Mine cut so much better that way for some reason.That is good to know! |
|
