|
|
Post by scrapperal on Oct 25, 2021 19:05:19 GMT
You know how one thing leads to another. I cut up some old magnetic sheets to hold my dies, but the corners are too sharp so I want to round the corners. What corner rounder would you suggest?
|
|
|
|
Post by hmp on Oct 25, 2021 20:16:05 GMT
I use the Crop-A-Dile Corner Chomper made by WRMK. It has never failed me! I use it routinely on heavy duty chip board, magnet sheets and lightweight sheets of metal. I think you will love it.
|
|
|
|
Post by scrapperal on Oct 25, 2021 20:22:23 GMT
Thanks hmp! Good to know that it will actually work on magnetic sheets. I was hesitant because of the price. |
|
GiantsFan
Prolific Pea
Posts: 8,500
Site Supporter
Jun 27, 2014 14:44:56 GMT
|
Post by GiantsFan on Oct 25, 2021 20:23:35 GMT
I use the Crop-A-Dile Corner Chomper made by WRMK. It has never failed me! I use it routinely on heavy duty chip board, magnet sheets and lightweight sheets of metal. I think you will love it. Same here. I had an old "whale" shaped one and the Creative Memories one. Those two would always get stuck and I'd have to use a screwdriver to pry them open. The Crop-A-Dile Corner Chomper has never failed me. I have the teal one that chomps 1/2" and 1/4". |
|
pamelakay
Full Member
Posts: 102
Oct 14, 2021 22:33:22 GMT
|
Post by pamelakay on Oct 25, 2021 23:23:25 GMT
Same here, Crop-A-Dile.
|
|
|
|
Post by Basket1lady on Oct 26, 2021 10:44:22 GMT
Add me to the Crop-o-dile fan club. It’s never failed me.
|
|
scrappington
Pearl Clutcher
in Canada
Posts: 3,139 
|
Post by scrappington on Oct 26, 2021 13:47:23 GMT
Same as all the above. It's worth the money. You need no other corner rounder
|
|
|
|
Post by infochick on Oct 26, 2021 17:28:05 GMT
Echoing everyone else with the Crop-A-Dile Corner Chomper. I have two, and each has two different sizes of rounders, so I have four all together. The last corner rounders you will ever need!
|
|
|
|
Post by papersilly on Oct 26, 2021 18:17:12 GMT
WRMK chomper. i have both of them with a combined 4 sizes of corner rounder.
|
|
|
|
Post by scrapperal on Oct 31, 2021 16:42:48 GMT
WRMK teal corner chomper and Prime shipping for the win! I was going to purchase the corner chomper from my local JoAnn, but it was cheaper on Amazon. Thanks for the suggestion everyone.
It cut through the magnetic sheets without any problem. My only problem was getting the sheet all the way into the corner, but that is user error, not an issue with the product.
|
|
|
|
Post by hop2 on Oct 31, 2021 16:53:40 GMT
My chomper did not cut my magnet sheets. I wonder if the newer ones aren’t as good. I’ve only had mine about a year.
In fact it doesn’t do well cutting the plastic dollar tree mats either which is what I bought it for.
|
|
|
|
Post by scrapperal on Oct 31, 2021 16:57:20 GMT
Oh no! Sorry to hear that it didn't work for you. I am cutting an old car door magnet, so the sheet isn't very thick. It did have a little trouble making a clean cut on the vinyl, but when I flipped the sheet over to cut that side first, it cut cleanly.
|
|
|
|
Post by hmp on Nov 2, 2021 14:42:45 GMT
Scrapperal, so glad it worked for you!
Hop2, I would call CS at WRMK & explain what’s going on & ask for a replacement. It should work better than what you’re experiencing.
|
|
