|
|
Post by karinec on Nov 22, 2021 18:26:47 GMT
I would like to take a die cut page divider (it says Fa La La) and scan it with my Cameo, then flip the image and cut it out on a different piece of paper.
Is this possible? I have an older Cameo, would I just need to buy a Pixscan mat?
Thank you!
|
|
|
|
Post by scrapcat on Nov 22, 2021 18:53:50 GMT
I am by no means a Silhouette expert, so hopefully one will weigh in. I do know you can flip things horizontally and vertically, when you say flip, will the words (fa lala) be backwards then? I think you may be able to do it without the pixscan if you can scan in the page and save it as a png image somehow.
Then open it, flip it horizontally, put the registration marks on the design to print first then place back on the mat to cut it?
|
|
|
|
Post by wendifful on Nov 22, 2021 19:33:53 GMT
I agree with scrapcat, I don't think you need the Pixscan mat. I also don't think you'd need registration marks unless you're printing something, which from your description, it doesn't sound like you are? Simply scan it into the software and flip/manipulate the image as needed, then cut from paper. |
|
|
|
Post by karinec on Nov 22, 2021 19:46:56 GMT
Thank you! I will give that a try.
|
|
|
|
Post by karinec on Nov 23, 2021 1:49:19 GMT
scrapcat wendifful thank you both so much. I was able to scan it, trace it, resize and cut it out. I was within a hairsbreadth of the right size, so what I decided to do was offset the original design (in black) with the cut design (in red). It looks great!
|
|
|
|
Post by scrapcat on Nov 23, 2021 17:09:42 GMT
scrapcat wendifful thank you both so much. I was able to scan it, trace it, resize and cut it out. I was within a hairsbreadth of the right size, so what I decided to do was offset the original design (in black) with the cut design (in red). It looks great! Yay! glad you got it figured out. |
|
|
|
Post by karinec on Nov 27, 2021 18:46:35 GMT
|
|
