breetheflea
Drama Llama
Posts: 6,596 
Location: PNW
|
Post by breetheflea on Oct 31, 2022 18:21:10 GMT
I have a Big Shot and have a stars die and a circles die that cuts four shapes at once that I use all of the time, but the one I always wonder why I don't own is one that cuts hearts... I have two heart punches, and a Silhouette but "my scrapping life would be so much easier if I had a heart die for the Big Shot," says me every time I need a heart for a page. I finally went on e-bay and ordered one. Sometime in November all the hearts will be mine!!! So what item would complete your craft life, that you don't own ? Besides a craft room, a robot to clean the room, and more time  |
|
|
|
Post by mikklynn on Oct 31, 2022 18:50:14 GMT
Oh, I'd like a robot!
I would really like a photo printer. I often want to do a better crop or print another photo in the middle of a layout. A photo printer would be handy.
|
|
christinec68
Drama Llama
Posts: 5,437
Location: New York, NY
|
Post by christinec68 on Oct 31, 2022 19:10:32 GMT
Right now, I want to get one of those little personal trimmers from CM.
|
|
scrappinwithoutpeas
Pearl Clutcher
Posts: 3,014
Location: Northern Virginia
|
Post by scrappinwithoutpeas on Oct 31, 2022 20:08:06 GMT
I have a Silhouette Cameo that I use extensively for titles, words, die cuts, and other embellishments. I've never wanted a cutting machine that uses dies (bc I don't want to buy dies when I already have a lot of cut files for the Cameo)...but I often find myself wanting to emboss something and am reluctant to spend the time doing it manually (too fiddly and tedious and for mixed results), so I go around in circles about wanting some sort of cutting tool that I can use to emboss. I'd be OK with a manual one, but have no idea what to get, probably the Spellbinders Platinum since it folds for a smaller footprint. I don't want to spend too much and I don't want something huge, but I think I'd really get a lot of use from it for embossing.
ETA: Good thread topic!!
|
|
|
|
Post by myboysnme on Oct 31, 2022 20:26:50 GMT
Why don't I own a die cut machine that can cut a larger die like Tim Holz?
Why don't I own an electronic diecut machine like a cameo?
|
|
|
|
Post by workingclassdog on Oct 31, 2022 21:14:02 GMT
Why don't I own an electronic diecut machine? (I have had two hand me downs in the past and neither worked) and I bought a Baby Cricut when they first came out and I LOST it. (probably left behind at a retreat). I am destined not to have one.
|
|
|
|
Post by papersilly on Oct 31, 2022 21:32:14 GMT
i like to make my own flair for projects. a 1.313" punch would be great for cutting out the circles that would fit perfectly in the button machine. wouldn't you know it----the scrapbook world has all sizes of circle punches but not the 1.313". i know i know, it's a totally random size and that is why the one i want costs $55.00.  i've been hand cutting the circle images myself but it is a pain when you make 40 buttons at a time. |
|
|
|
Post by papersilly on Oct 31, 2022 21:34:32 GMT
Why don't I own an electronic diecut machine? (I have had two hand me downs in the past and neither worked) and I bought a Baby Cricut when they first came out and I LOST it. (probably left behind at a retreat). I am destined not to have one. that's funny. how do you lose a machine that size? i know it was the personal size machine but it's hard to miss that when it's time to pack up. scissors, sure. ink pads, embellishments and other little tools but a whole machine? that's mortifying but funny. |
|
Ryann
Pearl Clutcher
Love is Inclusive
Posts: 2,643
Location: PNW
|
Post by Ryann on Oct 31, 2022 22:30:27 GMT
i like to make my own flair for projects. a 1.313" punch would be great for cutting out the circles that would fit perfectly in the button machine. wouldn't you know it----the scrapbook world has all sizes of circle punches but not the 1.313". i know i know, it's a totally random size and that is why the one i want costs $55.00. i've been hand cutting the circle images myself but it is a pain when you make 40 buttons at a time. I have a button machine from Button Boy and it came with the punch. I went to find the punch to link it to you, and it’s $54 including shipping, so maybe the one you are talking about. Sorry, not helpful after all, lol. |
|
|
|
Post by scrappypeanut on Nov 1, 2022 0:21:11 GMT
Why oh why when I was a DINK (dual income no kids :-) did I not splurge for the Genesis paper trimmer.
|
|
|
|
Post by sunnydelight on Nov 1, 2022 0:58:14 GMT
I would love to exchange my Vagabond and Gemini machines for a Big Shot Switch. Unless they croak it won’t happen.
|
|
miascraps
Full Member
Posts: 379
Jun 26, 2014 15:37:58 GMT
|
Post by miascraps on Nov 1, 2022 6:26:06 GMT
With the accumulation of slim line dies it would be so much easier if I had the extended platform for the big shot. Currently I have to adjust and run the dies through twice to catch the ends.
breetheflea …. I broke down and got heart dies 2 days ago!
|
|
|
|
Post by tc on Nov 1, 2022 18:42:01 GMT
Heart cutting tools for me too! Either dies or punches or something...I always think I have them. And then I go to create a heart, and all I've got are some templates from 1999. My hand cutting always looks not smooth so I get frustrated. I don't want to fire up the Cricut to just cut some hearts.
|
|
|
|
Post by tc on Nov 1, 2022 18:43:11 GMT
Also, the "right color" green marker. I have lots of green markers. But none of them seem to be the appropriate color to color foilage, stems, leaves, etc. in a shade that matches my project.
|
|
|
|
Post by 950nancy on Nov 1, 2022 18:51:40 GMT
The only thing I reallllly want, but I cannot purchase is the Glowforge. I reallllllly want it and can afford it, but I worry that I just won't use it and it isn't cheap. But oh, the gifts I could make.
|
|
|
|
Post by don on Nov 1, 2022 19:35:29 GMT
I can't think of a thing, except my candy bag is half empty .... but Halloween candy is on sale now.  |
|
|
|
Post by hop2 on Nov 1, 2022 20:51:46 GMT
The only thing I reallllly want, but I cannot purchase is the Glowforge. I reallllllly want it and can afford it, but I worry that I just won't use it and it isn't cheap. But oh, the gifts I could make. I have come >< close on multiple occasions during bouts of insomnia to buying a glow forge. It wasn’t the price that stopped me either, it was the one can I hook this up & use it myself without help that stopped me. My kids think I’m nuts |
|
|
|
Post by 950nancy on Nov 1, 2022 21:53:20 GMT
The only thing I reallllly want, but I cannot purchase is the Glowforge. I reallllllly want it and can afford it, but I worry that I just won't use it and it isn't cheap. But oh, the gifts I could make. I have come >< close on multiple occasions during bouts of insomnia to buying a glow forge. It wasn’t the price that stopped me either, it was the one can I hook this up & use it myself without help that stopped me. My kids think I’m nuts I've watched videos of it and it needs to be in a room with ventilation. That is kind of an issue unless I put it in the garage. I have a room with windows, but I am not sure if it would be enough. |
|
|
|
Post by Aheartfeltcard on Nov 1, 2022 22:58:06 GMT
If only had a laser printer so that I could print and foil.
|
|
Alaska_laci
Junior Member
Posts: 82
|
Post by Alaska_laci on Nov 2, 2022 17:41:23 GMT
I can't think of a thing, except my candy bag is half empty .... but Halloween candy is on sale now. That's what I was thinking. haha I need more snacks and candy... |
|
Alaska_laci
Junior Member
Posts: 82
|
Post by Alaska_laci on Nov 2, 2022 17:43:04 GMT
Ink Pads, why havent I purchased new ink pads? All mine are about 15 years old and now that I'm doing a lot more stamping I think I'm going to invest in the new magnetic closure CTMH ones.. I got 2 from a sale online and really love them.
|
|
scrapnnana
Drama Llama
Posts: 6,459
|
Post by scrapnnana on Nov 2, 2022 17:56:17 GMT
The only thing I reallllly want, but I cannot purchase is the Glowforge. I reallllllly want it and can afford it, but I worry that I just won't use it and it isn't cheap. But oh, the gifts I could make. Same here. But I don’t feel like I can afford it, and I don’t know where I would put it. And I wonder how much I would really actually use it, too. On the other hand, part of me thinks the Cameo 4, with the capability of cutting balsa wood might be a more affordable and better (for me) option. I can’t quite bring myself to think that seriously about it, though. |
|
|
|
Post by positivelyreek on Nov 2, 2022 19:03:54 GMT
Something that I have not purchased yet, but want is a Cameo. I have a brother scan n cut, also a cricut. I am a little intimidated by the software.
|
|
nylene
Drama Llama
Posts: 6,784
|
Post by nylene on Nov 2, 2022 19:52:54 GMT
Something that I have not purchased yet, but want is a Cameo. I have a brother scan n cut, also a cricut. I am a little intimidated by the software. I am the most computer, technology-challenged Pea in the pod. I played with the free Cameo software for one day and ordered the machine. My DSIL came over to help if I needed it, but he was busy with DH for a while. By the time he came into the scraproom I had that Cameo cutting! I think you will be surprised at how easy it is. There are lots of things to learn, but there are a lot of online helps and the Peas are an amazing resource for help. |
|
[/URL]
