cabinlivin
Junior Member
Posts: 51 
|
Post by cabinlivin on Jan 6, 2023 23:17:20 GMT
Long time lurker here. Just getting back into scrapping and have many, many questions.... so hopefully you'll be patient with me!
What is the best way to make titles with my Cameo? I have the Silhouette Cameo 3 and I've used it a ton for vinyl to make signs and shirts. I would like to use it in scrapbooking to make titles and such. But I'm having a hard time with cardstock in it. Do you use cardstock to make your titles or do any of you use vinyl to make titles? The size of letters that I want to make for titles is bugging me between cutting and then gluing them on. So what do most of you do?
|
|
scrappinwithoutpeas
Pearl Clutcher
Posts: 3,011
Location: Northern Virginia
|
Post by scrappinwithoutpeas on Jan 6, 2023 23:55:45 GMT
HI there! I make almost all of my titles for my scrapbook layouts with my Cameo. I use cardstock, usually smooth but I'll occasionally use a slightly textured CS. Stay away from CS that has a high fibrous content or is too lightweight, as it will not cut well.
I have several script-y fonts that are great for "welding" so I usually use one of those (as opposed to cutting individual letters to make up the title). For adhering these, I usually run them through my Xyron.
Once in a while I cut out a larger title using single letters not welded together.
|
|
|
|
Post by cmpeter on Jan 7, 2023 1:08:49 GMT
I use cardstock. Some cuts better than others. The stuff from Hobby Lobby is terrible.
|
|
gramma
Pearl Clutcher
Posts: 3,103
Location: Sacramento, Ca
|
Post by gramma on Jan 7, 2023 5:01:35 GMT
Nearly every layout I do has a title. Most of them are done on my Cameo.
I always use a mat - mid to heavy weight smooth card stock - I try to stay away from fonts that are too small or fine on cardstock - For small,fine fonts I use vinyl - I reduce the space between letters, group and weld whenever possible. Most of my titles are double matted in coordinating colors
|
|
scrapnnana
Drama Llama
Posts: 6,434
|
Post by scrapnnana on Jan 7, 2023 13:54:36 GMT
I use my Cameo 3 for everything, including titles. I usually use card stock, mostly Bazzill , Michaels brand, or a heavier weight from Staples, but if you want to use a thin font, vinyl could be a better option. However, I have no idea if it could affect your layout by discoloration years down the road. I have only used vinyl for cards, and only rarely. I have never liked Hobby Lobby papers. You can also double cut if your card stock doesn’t cut as cleanly. Use the test cut option if you aren’t sure. Also, humidity can affect how your card stock cuts. If your craft room is in a basement, or you live in a more humid area, cutting card stock can sometimes be challenging. Lessening the pressure and cutting multiple times as needed can help.
Gluing individual letters can be a pain, especially if you mat the letters. I often weld letters together, which makes that task a little easier, since there are fewer pieces. I use tweezers to help, especially if I cut out individual letters, but some prefer a pick up tool.
|
|
cabinlivin
Junior Member
Posts: 51
|
Post by cabinlivin on Jan 7, 2023 22:02:09 GMT
Thank you all for your help!! I think I just need a little more practice/patience with using cardstock. Welding titles is a really good idea!
|
|
|
|
Post by 950nancy on Jan 7, 2023 22:06:53 GMT
Thank you all for your help!! I think I just need a little more practice/patience with using cardstock. Welding titles is a really good idea! I am at a loss for remembering what to call it, but sometimes more intricate cuts do better with a cut that goes a little further than it should. Like a tiny bit. It is a setting on your Cameo. It just ensures that your paper doesn't have places in it that aren't actually cut in the corners. |
|
gramma
Pearl Clutcher
Posts: 3,103
Location: Sacramento, Ca
|
Post by gramma on Jan 7, 2023 23:02:46 GMT
Thank you all for your help!! I think I just need a little more practice/patience with using cardstock. Welding titles is a really good idea! I am at a loss for remembering what to call it, but sometimes more intricate cuts do better with a cut that goes a little further than it should. Like a tiny bit. It is a setting on your Cameo. It just ensures that your paper doesn't have places in it that aren't actually cut in the corners. That's the overcut feature. It makes everything cut cleaner. |
|
|
|
Post by 950nancy on Jan 8, 2023 1:05:12 GMT
I am at a loss for remembering what to call it, but sometimes more intricate cuts do better with a cut that goes a little further than it should. Like a tiny bit. It is a setting on your Cameo. It just ensures that your paper doesn't have places in it that aren't actually cut in the corners. That's the overcut feature. It makes everything cut cleaner. I knew someone would know exactly what I was trying to remember! |
|
cabinlivin
Junior Member
Posts: 51
|
Post by cabinlivin on Jan 8, 2023 19:19:56 GMT
Do you use a different blade for your card stock?
|
|
|
|
Post by Neisey on Jan 9, 2023 2:12:07 GMT
I also use my cameo on almost every LO title. I recently started using the CB09 after market blades and have found them to do a great job.
My advice is much like others, use the overcut feature, stay away from (or use vinyl) for thin/fine fonts. Also, slow the blade down if there are lots of curly parts, don’t forget to use the test cut feature and you can also increase the number of passes if you are having difficulty fully cutting through.
Have fun!
|
|
scrapnnana
Drama Llama
Posts: 6,434
|
Post by scrapnnana on Jan 9, 2023 5:23:22 GMT
Do you use a different blade for your card stock? No, I don’t. I did when I used the regular blades, but now that I use the Auto blade, I don’t. It does it all and has lasted a long time. |
|
cabinlivin
Junior Member
Posts: 51
|
Post by cabinlivin on Jan 10, 2023 17:47:41 GMT
Thank you all for your advise. I've learned a ton and jumped in doing more with cardstock and my Cameo. It's really fun!
|
|
