artbabe
Pearl Clutcher
Posts: 3,408 
|
Post by artbabe on Jun 9, 2023 14:49:08 GMT
On the Thicker thread someone mentioned that they didn't like them because they only scrapped flat.
So I wondered if there are any other flat scrappers out there? I've seen some really nice flat pages in galleries.
I have to have some kind of dimension on mine. Not so bumpy that it won't go in a page protector, but I very seldom scrap flat.
Pop dots are my friend. I use so many. When I make embellishment clusters I like to have at least one of the items popped out. Sometimes I even pop out the photos. I bought a ton of pop dots at Tuesday Morning but I'm starting to get nervous about running out. I need another cheap supplier.
Thickers, enamel dots, ribbons/bows, wood shapes, etc. show up on my pages all of the time.
If you are a bumpy scrapper, what do you use and why?
If you a flat scrapper, why do you choose to scrap like that?
|
|
|
|
Post by Linda on Jun 9, 2023 14:54:53 GMT
I make a mix - some flat pages that are all or primarily cardstock based and some pages with a bit of dimension...I don't like too much because it won't fit as well in the album but a pop-dot here or chipboard there is fine.
I'm a yes for enamel dots, occasional hipboard, Thickers, pop-dots, dimensional stickers but I'm not as keen on metal embellishments, wood shapes, ribbons/bows and so on
|
|
|
|
Post by lisacharlotte on Jun 9, 2023 15:14:25 GMT
I like dimension. I don’t typically have more dimension that a standard pop dot/foam tape or enamel dot because it’s gonna get smashed in an album anyway.
|
|
|
|
Post by mbanda on Jun 9, 2023 15:36:21 GMT
I like some dimension as well. I use foam tape a lot to pop things up on my layouts.
I also like the texture of using chipboard, metal, wood, ribbon etc. Not on every layout but I do like it!
|
|
|
|
Post by mikklynn on Jun 9, 2023 15:38:56 GMT
I love dimension, but I have decided the pages take up too much space in my albums. I've gone through some older albums and removed thick flowers and flair. None of my flair had rusted, FYI.
|
|
Elsabelle
Pearl Clutcher
Posts: 3,688
|
Post by Elsabelle on Jun 9, 2023 16:31:06 GMT
I like some dimension. Nothing thicker than wood veneer, dimensional foam, or enamel dots, though. I draw the line at those huge rhinestone gem faux brads. They're just too thicc. I feel like a little dimension and texture brings a layout to life.
|
|
jediannie
Pearl Clutcher
Posts: 3,099
Jun 30, 2014 3:19:06 GMT
|
Post by jediannie on Jun 9, 2023 16:47:29 GMT
Flatish with some dimension?  I don't like anything too lumpy, nothing thicker than chipboard. |
|
|
|
Post by infochick on Jun 9, 2023 16:48:03 GMT
I like a little bump on my pages...my issue is that I need different thicknesses of foam. Lately I've been saving some money by using the sheets of kids adhesive craft foam from Walmart and then just cutting it to shape and sticking down the other side with Scor-Tape or glue. I've also been using some 3M foam tape from Home Depot. Both are cheaper than pop dots (which I still use and love) and are slightly different thicknesses, so the layering possibilities are almost endless  |
|
|
|
Post by ScrapbookMyLife on Jun 9, 2023 18:21:05 GMT
I am a mixture, but tend to lean more towards the flat side.
Mostly because I use a lot of stickers and frames, and there's not a lot depth or dimension to them. I mat almost all my photos, but again not a lot of depth and dimension doing that.
I do get a little dimension and bump, when I use thickers, chipboard or Jolee type products.
The products I use and choose are based on.... cuteness, color, and style I like.....not on flat or bulky.
I am open to using using either style(flat or bumpy), if it is or incorporates well with my personal scrapbook style.
|
|
|
|
Post by sarahsprettypapers on Jun 9, 2023 18:28:17 GMT
I like dimension on my page, and I like using acrylic, wood, fabrics... really anything. I always enjoy including ephemera from my trips in my albums and that always helps bulk up a page, too. I will include pockets to hold brochures, sea shells, wood chips, cool looking rocks, my dog's first collar... if my glue can hold it down, I will stick it on a layout. 😁
|
|
crabbybear
Junior Member
Posts: 65
Jul 27, 2018 14:56:32 GMT
|
Post by crabbybear on Jun 9, 2023 18:57:06 GMT
I have to have some kind of dimension on mine. Not so bumpy that it won't go in a page protector, but I very seldom scrap flat. I agree, I have to have at least a little dimension on my pages. |
|
|
|
Post by grammadee on Jun 9, 2023 21:55:59 GMT
I do both.
I like layers, but they don't have to be chunky. And sometimes layers that are stamped or splattered give an illusion of depth when actual depth is not there.
|
|
|
|
Post by papersilly on Jun 9, 2023 22:32:34 GMT
Dimensional for sure. I like texture and dimension in my projects.
|
|
scrappinwithoutpeas
Pearl Clutcher
Posts: 3,013
Location: Northern Virginia
|
Post by scrappinwithoutpeas on Jun 9, 2023 22:35:09 GMT
That was me who answered that I was a flat scrapper LOL! I think I'm in the minority here.  I don't mind a few layers, but no lumpy bumpy stuff. I just dislike what it does to the pages on the opposite side when they're all smooshed into an album. I like my pages to lie flat. I sometimes add a bit of dimension on cards, especially those that I will hand-deliver. I'm not opposed to the look & I like it on other scrappers pages, just don't like it on my own pages. |
|
|
|
Post by myboysnme on Jun 9, 2023 22:39:43 GMT
Back when "lumpy stuff" was a new thing I was one of the last converts. Now I prefer dimension and foam tape is one of my favorites.
|
|
PaperAngel
Prolific Pea
Posts: 8,012
Jun 27, 2014 23:04:06 GMT
|
Post by PaperAngel on Jun 10, 2023 0:46:14 GMT
Consistent with my style (& dislike of dents in page protectors & facing pages), my layouts are usually completely flat. Slight dimension is sometimes added via memorabilia, a couple layers of hidden cardstock behind unmatted photos, stenciling with glaze/paste, enamel dots, etc
|
|
|
|
Post by AussieMeg on Jun 10, 2023 0:46:25 GMT
I like dimension, and I use drop shadows on every single element I put onto a page. I also use a ton of enamel dots. Interestingly I prefer to use flower stickers rather than more dimensional flowers - but I still have to put a small drop shadow on the stickers!
|
|
Chinagirl828
Drama Llama
Melbourne, Australia
Posts: 6,688
Jun 28, 2014 6:28:53 GMT
|
Post by Chinagirl828 on Jun 10, 2023 2:32:14 GMT
I am a mixture, but tend to lean more towards the flat side. Mostly because I use a lot of stickers and frames, and there's not a lot depth or dimension to them. I mat almost all my photos, but again not a lot of depth and dimension doing that. I do get a little dimension and bump, when I use thickers, chipboard or Jolee type products. The products I use and choose are based on.... cuteness, color, and style I like.....not on flat or bulky. I am open to using using either style(flat or bumpy), if it is or incorporates well with my personal scrapbook style. This sums up my style pretty well. I'm not opposed to having dimension, I'll use things like flair and wood veneer, but if I'm adding it to paper/die cut layers I'll choose the flattest pop dots I can. |
|
|
|
Post by 950nancy on Jun 10, 2023 3:50:51 GMT
I like the look of dimension, so I use it. I do refuse to use flair though. Try to get about 50 layouts (25-2 pagers) in an album and flair is just too bumpy for me.
|
|
|
|
Post by hoopsfn on Jun 10, 2023 15:18:19 GMT
Like many of you, I like a little dimension on my l/o-s but don't want them to be too bulky. Enamel dots are fine as well as the thinner foam squares (like the 3L). I also use some flowers, ribbon, and have just invested in some stencil butter. Still working on trying to make that work right.  |
|
paget
Drama Llama
Posts: 7,119
Jun 25, 2014 21:16:39 GMT
|
Post by paget on Jun 11, 2023 14:05:09 GMT
When I used to scrap 12x12 my pages were hella chunky! Now, with project life, they are more flat. Chipboard is typically the only dimension on my pages. I do really like dimension but for PL it doesn’t appeal to me in the same way. |
|
breetheflea
Drama Llama
Posts: 6,594
Location: PNW
|
Post by breetheflea on Jun 11, 2023 15:43:55 GMT
Pretty flat. I occasionally use chipboard, or a button, or enamel dots but that's as dimensional as I get. I didn't find popping things up made any difference once the page was squashed in the page protector.
I did make some cards last Christmas and used some pop dots...
|
|
|
|
Post by KikiPea on Jun 12, 2023 6:17:04 GMT
Most of my LO’s have dimension in some way, usually florals that are not glued down all the way, or pop dots/foam tape. You can never have/use too many pop dots! LOL I also love layers in my embellishment clusters.
|
|
|
|
Post by Night Owl on Jun 12, 2023 7:34:44 GMT
Back in the day when I would get published and made layouts for my lss I would do a lot of dimension. Now that I just do it for me I go mainly flat because once it's in a page protector the bulk doesn't look as good plus I like to get more pages in an album.
|
|
christinec68
Drama Llama
Posts: 5,435
Location: New York, NY
|
Post by christinec68 on Jun 12, 2023 18:01:41 GMT
I am pretty sure all of the layouts I made in the past 10 years have some kind of dimension. I buy those giant, steering wheel sized rolls of 3m foam tape that I use behind pictures, die cuts and stickers. I sometimes use chipboard pieces but not too much since not sticking to their packaging sheet is annoying.
|
|
|
|
Post by artisticscrapper on Jun 13, 2023 0:52:32 GMT
It depends on what I have on hand but I like dimensional better. Lumpy pages were big a long while back. I liked them then and still do. I still have fibers and ribbon which I sometimes use and even some lace. Or sometimes I’ll incorporate 3D stencils.
|
|
|
|
Post by refugeepea on Jun 15, 2023 20:26:09 GMT
I'm a flat scrapper unless I happen to own an embellishment that is dimensional. It's laziness more than anything.
|
|
|
|
Post by rymeswithpurple on Jun 16, 2023 1:18:56 GMT
Flat scrapper here, but I have an idea for the first page of a future scrapbook that throws that all out the window. But it'll only be for that cover page. |
|
scrapnnana
Drama Llama
Posts: 6,451
|
Post by scrapnnana on Jun 16, 2023 4:51:26 GMT
I do some with dimension, some more flat. I always have at least layers, but sometimes I get dimension with texture by using thicker or rougher elements (like burlap), depending on the layout. However, I learned a long time ago to make sure nothing is so bumpy that it leaves an impression in the opposite page, especially when it comes to dents in the photos. I really hate dents or impressions in photos due to a lumpy embellishment on the opposite page. After making that mistake once or twice, I haven’t made it again.
|
|
pantsonfire
Drama Llama
Take a step back, evaluate what is important, and enjoy your life with those who you love.
Posts: 6,294
|
Post by pantsonfire on Jun 17, 2023 3:10:15 GMT
Both for me. Sometimes I create a flat layout or flat pocket page layout and it is exactly what it needs to be. Other times I add lots of dimension because to me it is what the layout calls for.
I don't count thickers for a title as a dimension piece.
|
|
