CARDtober #19: Two-for-One Z-fold Cards
Oct 19, 2023 9:32:56 GMT
MDscrapaholic, nylene, and 5 more like this
Post by Shakti on Oct 19, 2023 9:32:56 GMT
Good morning, Peas and grammadee ! I'm back with some more fun folds.
These cards, from one full 8 1/2 x 11" sheet of card stock, two 6x8" patterned papers, and a partial sheet of a second color is adapted from Club Scrap's Deluxe Card Formula 9 which makes 6 Z-fold cards from 5 sheets of 12x12", 3 solids and 2 prints. I can't share that formula, but I can say that Set C in their April 2022 Card Kit, Hooray, is 4 very similar Z-fold cards. From the kit instructions (with video link) you could get some basic Z-fold directions/dimensions should you feel the need: cdn.shopify.com/s/files/1/0440/9602/8828/files/0422Card.pdf?v=1648739745
Twist: I heard during week one that not everybody has 6x8"available, so here's a variation using 2 6x6" patterned papers and embossed panels in place of the remaining printed ones:
This should have been able to be done with only two sheets of card stock; the embossed panels and narrow z-strips would fit on one if cut properly the first time. I did not cut and emboss correctly; I struggled a bit getting the twist version to come together.
These cards, from one full 8 1/2 x 11" sheet of card stock, two 6x8" patterned papers, and a partial sheet of a second color is adapted from Club Scrap's Deluxe Card Formula 9 which makes 6 Z-fold cards from 5 sheets of 12x12", 3 solids and 2 prints. I can't share that formula, but I can say that Set C in their April 2022 Card Kit, Hooray, is 4 very similar Z-fold cards. From the kit instructions (with video link) you could get some basic Z-fold directions/dimensions should you feel the need: cdn.shopify.com/s/files/1/0440/9602/8828/files/0422Card.pdf?v=1648739745
Twist: I heard during week one that not everybody has 6x8"available, so here's a variation using 2 6x6" patterned papers and embossed panels in place of the remaining printed ones:
This should have been able to be done with only two sheets of card stock; the embossed panels and narrow z-strips would fit on one if cut properly the first time. I did not cut and emboss correctly; I struggled a bit getting the twist version to come together.
