edie3
Drama Llama
Posts: 5,685
Jun 26, 2014 1:03:18 GMT
|
Post by edie3 on Dec 1, 2023 22:59:54 GMT
I am having issues cutting. I am cutting a design 2 times because my blade is a little dull. I am using a new mat. The 2 cuts are not lining up. But only on part of the design. Could this be a calibration issue?
|
|
|
Post by 950nancy on Dec 1, 2023 23:41:47 GMT
It could be. Sometimes I just had to turn it off and then back on for a really easy fix. Mine is also about 13 years old.
|
|
|
Post by Basket1lady on Dec 2, 2023 0:05:21 GMT
It may be slipping or a problem with the file. I agree to turn it all off and on again.
One tip when it isn’t cutting well—setting the blade deeper isn’t always the answer. You want only the tip of the blade to do the cutting. I’ve found this to be especially true for intricate cuts. I usually do a shallower cut twice.
|
|
edie3
Drama Llama
Posts: 5,685
Jun 26, 2014 1:03:18 GMT
|
Post by edie3 on Dec 2, 2023 3:32:28 GMT
Not sure what it was, I turned it off for a bit, and then it worked fine.
|
|
|
Post by 950nancy on Dec 2, 2023 17:04:30 GMT
Not sure what it was, I turned it off for a bit, and then it worked fine. I have to laugh at this. My kid is an electrical engineer and the go-to fixer for anything electronic or more complicated fix. No matter what I call and ask him about, if it has a plug, he tells me to do this first. Even when I tell him I have already tried that, he says to do it again. It fixes things more often than not. Glad it is up and working.
|
|
|
Post by Basket1lady on Dec 2, 2023 21:34:48 GMT
Not sure what it was, I turned it off for a bit, and then it worked fine. I have to laugh at this. My kid is an electrical engineer and the go-to fixer for anything electronic or more complicated fix. No matter what I call and ask him about, if it has a plug, he tells me to do this first. Even when I tell him I have already tried that, he says to do it again. It fixes things more often than not. Glad it is up and working. My EE son says the same thing! Im glad that it fixed itself. I think it’s the cache. It doesn’t empty and then gets overwhelmed with too much data.
|
|
edie3
Drama Llama
Posts: 5,685
Jun 26, 2014 1:03:18 GMT
|
Post by edie3 on Dec 4, 2023 1:55:47 GMT
overwhelmed with too much data I did have lots of design pages open. Kinda like my brain!
|
|
|
Post by Basket1lady on Dec 4, 2023 2:28:32 GMT
overwhelmed with too much data I did have lots of design pages open. Kinda like my brain! I also have problems if I have Photos open, it will also bog down. My Mac is 10 years old, but it still works well when I take the quirks into account.
|
|