|
|
Post by KikiPea on Jan 11, 2024 0:08:38 GMT
I just got a storage unit for my distress pads that have them laying flat. I’ve always had them standing up, so never had a need for the labels, but now I need them.
I didn’t realize you had to pay for them. I’ve seen them in a few different places. Where’s the best place to get them? What type of sticker paper do you use to print them on?
Thanks!
|
|
|
|
Post by wallyagain on Jan 11, 2024 0:43:23 GMT
Ranger has downloadable labels, down at the bottom of their page, under organize your ranger products.
|
|
kitbop
Pearl Clutcher
Posts: 4,622 
|
Post by kitbop on Jan 11, 2024 0:55:04 GMT
I'm cheap. I cut pieces of cardstock, swiped them with the ink and wrote the name overtop. Adhered with double sided (strong) tape.
|
|
|
|
Post by 950nancy on Jan 11, 2024 4:01:16 GMT
I went to the Ranger site and had them printed. I wouldn't say they are spot on for color with my printer though.
I bought a bunch of small labels from maybe Target. They were bright white.
|
|
scrappinwithoutpeas
Pearl Clutcher
Posts: 3,011
Location: Northern Virginia
|
Post by scrappinwithoutpeas on Jan 11, 2024 4:11:38 GMT
I'm cheap. I cut pieces of cardstock, swiped them with the ink and wrote the name overtop. Adhered with double sided (strong) tape. I did something similar, just swiped the ink on bright white Avery labels, wrote the name on it, and then cut the Avery labels to size and stuck them on. |
|
lindas
Pearl Clutcher
Posts: 4,305
|
Post by lindas on Jan 11, 2024 4:47:14 GMT
You can download and print for free from here link. I also printed her free color chart so I can see a large sample of the colors. |
|
|
|
Post by kimba on Jan 11, 2024 9:25:28 GMT
I have vertical holders from scrapbook.com and the inks lay flat in each slot. I just write the name of the ink on a side with a sharpie.
I have the inks swatched on 8x11 paper so its easy to grab and see what ink i want to use.
|
|
|
|
Post by mcjunkin on Jan 11, 2024 13:57:41 GMT
The labels from Ranger are downloadable for free. Scroll to the bottom of the Ranger site and look under organization.
|
|
|
|
Post by lanena on Jan 11, 2024 16:55:27 GMT
I use the Ranger site, and I just print on a full-size (8 1/2 X 11) sticker sheet. I've been cutting the labels out by hand, but I just realized that now that I have a Silhouette, it will cut these for me. Sharing the link because I always forget where to go! Ranger Distress Ink Pad Labels |
|
GiantsFan
Prolific Pea
Posts: 8,501
Site Supporter
Jun 27, 2014 14:44:56 GMT
|
Post by GiantsFan on Jan 11, 2024 22:21:45 GMT
As others have done I downloaded the label file from the Ranger website. My color printer is kinda hit or miss, so I took the file to a print shop and used their color machine to print on sticky paper. The colors are not an exact match but surprisingly close enough to work. But cutting that sticky paper (ugh!) was a pain in the tutu.
|
|
|
|
Post by KikiPea on Jan 11, 2024 22:31:22 GMT
Thanks, y’all!
|
|
caangel
Drama Llama
Posts: 5,730
Location: So Cal
|
Post by caangel on Jan 12, 2024 2:55:59 GMT
I'm cheap. I cut pieces of cardstock, swiped them with the ink and wrote the name overtop. Adhered with double sided (strong) tape. I did something similar, just swiped the ink on bright white Avery labels, wrote the name on it, and then cut the Avery labels to size and stuck them on. This is what I do but with the smaller return address labels, so no cutting. |
|
