|
|
Post by mrgiedrnkr on Jan 22, 2024 2:08:33 GMT
I want to print clear sticker images and then have them cut out. I want to use them for my planner. I am a digital scrapper so I am not up to date on the latest paper toys! Assuming it is cricket or cameo? I was looking at circut joy but wasn’t sure if it would print the image. Thanks for any help! Example |
|
|
|
Post by scrapaddict702 on Jan 22, 2024 3:46:47 GMT
For cameo and cricut you print registration marks on the image from a regular printer and then the device reads the marks to know where to cut...as far as I know, there isn't a device that does both.
|
|
|
|
Post by riversong1963 on Jan 22, 2024 11:28:49 GMT
You can do that with Cricut machines; however, the Joy does not have print then cut capability. You would need to use the Joy Extra if you want a smaller machine. The Silhouette machines will work too, although the Portrait is a little larger than the Cricut Joy Extra. As far as I know, all the Cricut and Silhouette machines have a drawing function too. HTH.
|
|
|
|
Post by caspad on Jan 22, 2024 14:05:53 GMT
The Silhouette Cameo and Portrait can print and cut. Here is a tutorial on making planner stickersIf you don't have a home printer, you could have the stickers printed onto label paper at Staples. Just make sure to use registration marks! |
|
blemon
Pearl Clutcher
Posts: 3,503 
|
Post by blemon on Jan 22, 2024 15:41:23 GMT
I use the Maco paper from Amazon. It's very good.
The one thing I have learned is that my printer doesn't like it if I just put one sheet of it in the feed. So I have been putting a few sheets of plain paper behind it and it feeds in better.
|
|
|
|
Post by papersilly on Jan 22, 2024 18:21:43 GMT
i think i saw that someone did a hack so that the cricut joy can do very simple print and cut. i think people drew the items first and then cut the item with an offset.
|
|
scrapnnana
Drama Llama
Posts: 6,427
|
Post by scrapnnana on Jan 23, 2024 2:17:37 GMT
I use my Cameo for print and cut. I print on card stock, then glue them to my page/project. Whether or not it prints on a clear sticker sheet would depend on your printer, and possibly the ink. As long as you include the registration marks, the Silhouette should be able to cut the printed stickers sheet.
|
|
