MerryMom
Pearl Clutcher
Posts: 2,567 
|
Post by MerryMom on Jan 6, 2015 15:38:47 GMT
On January 2, I bought 9 Recollections brand storage cubes.
Any tips on assembly?
Do you recommend using a power screwdriver? Using a small amount of Gorilla glue?
I don't plan on moving, so other than rearranging the cubes maybe once every ten years, they will remain where they are.
Does the plain storage cube ever sag in the middle? If so, should I put in a small dowel rod to prevent this?
Any tips would be appreciated.
I've assembled 3 2x4 IKEA Expedit before.
Thanks
|
|
Deleted
Posts: 0
Nov 26, 2024 18:35:26 GMT
|
Post by Deleted on Jan 6, 2015 17:47:11 GMT
Congrats on your storage cubes. I don't love putting them together but I sure love having them, and putting things in them after! This is from 2009 but I blogged about my experience putting together the Jetmax cubes from Michaels HERE. Assuming they haven't changed, you might find it helpful. Good luck! |
|
|
|
Post by Scrappea on Jan 6, 2015 20:47:35 GMT
Power screwdriver (I used a power drill with a screwdriver head for more power) definitely. Your hands will thank you and they will come together more quickly!
|
|
|
|
Post by Basket1lady on Jan 6, 2015 21:00:23 GMT
Yes, a power screwdriver is your friend. I used a drill with a screwdriver head.
My tip is to assemble them in front of your DH. Mine couldn't resist "helping" and ended up putting together the majority of the cubes.
I've moved with mine several times and they are very sturdy. I've had no problems, but there isn't a to. Of weight in most of them.
|
|
MerryMom
Pearl Clutcher
Posts: 2,567
|
Post by MerryMom on Jan 7, 2015 16:09:29 GMT
Thanks for the tips. Along with using a power screwdriver, I'll put a few drops of glue before putting in the screws.
|
|
|
|
Post by papersilly on Jan 8, 2015 19:33:47 GMT
power screwdriver, if gently used, is your friend. I usually use a power tool at first and then use a regular screwdriver for the final turns so I can control the power. overdriving can chip the wood or crack the narrow sides where the holes are located. wood glue is also your friend.
|
|
