|
|
Post by chaosisapony on Nov 6, 2015 3:43:18 GMT
This is my second time attempting to use Jamberry Wraps. I am doing them on my ring fingers only as an accent to my gel polish. I watched the video on application before buying any and it seemed easy enough. The problem I am running into is that there is a sort of raised triangle pucker in the center of each nail on the very edge. It happens in the same spot on each hand and has been that way both times I've used the wraps. What am I doing wrong?
|
|
|
|
Post by mrgiedrnkr on Nov 6, 2015 3:52:28 GMT
I have never gotten them to look like anything except vinyl stickers on my nails. I have tried all the tips/tricks/instructions.
Stacy
|
|
|
|
Post by alexa11 on Nov 6, 2015 3:52:15 GMT
I will ask my daughter. She is loving this stuff.
|
|
|
|
Post by myshelly on Nov 6, 2015 3:53:02 GMT
Search YouTube for the cold set method. Basically you apply the jams without heating them first, get them placed where you want them, smooth out all the wrinkles and puckers, and then heat them with a rice bag. It is so much easier to get a smooth finish and complete seal this way.
(My favorite videos are the ones by BeautyandJams)
|
|
|
|
Post by hop2 on Nov 6, 2015 4:07:04 GMT
Also don't try to fit them all they way to the sides of your nails. Once I chose the size a sliver smaller I had no problems.
|
|
|
|
Post by chaosisapony on Nov 6, 2015 4:10:24 GMT
Also don't try to fit them all they way to the sides of your nails. Once I chose the size a sliver smaller I had no problems. There's no worry on that part. I actually find it quite annoying that my nails seem to be between sizes. They are either too large or too small so I go with the too small ones. The visible gap bothers me but I doubt it's noticeable to anyone else. I will look up videos on the cold application method. That sounds like it may be easier for me anyway because I don't have a good way to heat them up and home so I have to do them at work where we have a space heater LOL. |
|
|
|
Post by leslie132 on Nov 6, 2015 4:11:52 GMT
Yes, I would try the smaller size because when they get heated some of the wraps have a greater give to them. That give should give you a chance to smooth down over the nail.
Also.... Contact your rep. I am a rep, and I am working on an issue for one of my friends/client. Her issue is with the lacquer polish lifting. I am asking consultants on FB to help find answers. You should be pleased with your purchase.....I hope you get there!!
|
|
|
|
Post by lisacharlotte on Nov 6, 2015 4:18:10 GMT
Same issue here. Either a wrinkle at the tip or at the sides. It's not worth the hassle for me.
|
|
|
|
Post by chaosisapony on Nov 6, 2015 4:27:51 GMT
Yes, I would try the smaller size because when they get heated some of the wraps have a greater give to them. That give should give you a chance to smooth down over the nail. That's interesting, I didn't know that. Perhaps I'm not pressing down hard enough when I smooth them so the give in them bunches up when they cool back off. They always seem pristine when I do the application and I notice the pucker about an hour later. |
|
|
|
Post by leslie132 on Nov 6, 2015 4:43:00 GMT
Yes, I would try the smaller size because when they get heated some of the wraps have a greater give to them. That give should give you a chance to smooth down over the nail. That's interesting, I didn't know that. Perhaps I'm not pressing down hard enough when I smooth them so the give in them bunches up when they cool back off. They always seem pristine when I do the application and I notice the pucker about an hour later. My number one tip is to use the baggy method. First is apply the nail wrap. I do the heater method opposed to the cool method. Then after I file them down I place a baggy over my nail, apply the heat again and rub the wrap thru the baggy. This little extra step has helped extend the life of my wrap by days. What wrap are you applying?? |
|
|
|
Post by leslie132 on Nov 6, 2015 4:47:16 GMT
Same issue here. Either a wrinkle at the tip or at the sides. It's not worth the hassle for me. I'm not trying to sell. I just hate the thought of people spending good money and not using them or liking how they fit. I just mentioned the Baggy method. And with what you said happens to your wrap I would think doing the baggy method would help you. (It adds about 3 additional minutes to the whole manicure), but could sto the issues you mentioned. Not trying to hassle.... Just wanted to possibly help! And I realize they aren't for everyone. If someone would have told me 9 months ago that I would sell nail wraps I would have rolled on the floor laughing. |
|
|
|
Post by myshelly on Nov 6, 2015 4:49:21 GMT
I do the baggie thing with the cold set method.
|
|
|
|
Post by chaosisapony on Nov 6, 2015 5:16:39 GMT
That's interesting, I didn't know that. Perhaps I'm not pressing down hard enough when I smooth them so the give in them bunches up when they cool back off. They always seem pristine when I do the application and I notice the pucker about an hour later. My number one tip is to use the baggy method. First is apply the nail wrap. I do the heater method opposed to the cool method. Then after I file them down I place a baggy over my nail, apply the heat again and rub the wrap thru the baggy. This little extra step has helped extend the life of my wrap by days. What wrap are you applying?? Why does rubbing through the bag help? Not that I'm doubting you, it just doesn't make sense to me why it would be any different. I'm currently having the issue with Fractal. Luckily it's a busy pattern so the pucker isn't that noticeable. I would like to try Faux Fox next though and the smooth grey finish on that I know is going to show every imperfection. |
|
Deleted
Posts: 0
Aug 18, 2025 21:51:27 GMT
|
Post by Deleted on Nov 6, 2015 6:29:08 GMT
I haven't had this issue with Jamberry, because my nail beds are pretty flat. But I have heard of something called the baseball method, or something similar. It's for people who have more of a rounded (think domed) nail bed which is the common cause if that wrinkle, you just can't cover something rounded with something flat. Anyway in this method you basically cut a tiny triangle in a strategic spot either on the corners of the wrap or on the middle edge depending on what works for you.
Like I said I haven't needed it but I have heard of others that are pleased with it. It may be worth a try. You can look it up on YouTube to get an idea of how it works.
|
|
4cboysmommy
Full Member
Posts: 213
Sept 13, 2014 1:19:39 GMT
|
Post by 4cboysmommy on Nov 6, 2015 11:44:50 GMT
I agree with the baggie method. I'm not sure why it works, but I was having the same problems before someone showed me the trick. I had my last set last two full weeks with no puckering or lifting. I usually just use mine as accents so it doesn't add too much time to the process.
|
|
|
|
Post by leslie132 on Nov 6, 2015 12:37:56 GMT
My number one tip is to use the baggy method. First is apply the nail wrap. I do the heater method opposed to the cool method. Then after I file them down I place a baggy over my nail, apply the heat again and rub the wrap thru the baggy. This little extra step has helped extend the life of my wrap by days. What wrap are you applying?? Why does rubbing through the bag help? Not that I'm doubting you, it just doesn't make sense to me why it would be any different. I'm currently having the issue with Fractal. Luckily it's a busy pattern so the pucker isn't that noticeable. I would like to try Faux Fox next though and the smooth grey finish on that I know is going to show every imperfection. The heat off the heater makes the baggy "shrink" in against the wrap. Causing a vacuum like situation. When you have the "suction" and add further pressure by rubbing it down again, it seems to seal the wrap even stronger. I have Fractal. I LOVE the Fox wrap. That is on my list to buy soon. it is just very cute! I'm sitting down right after my son leaves for school. I'm going to layer my wraps today. On some fingers I'm doing Apple Cider and on a few others I'm going to layer, Gold Chevron over After Dark! Perfect for a night out this weekend! |
|
|
|
Post by pierkiss on Nov 6, 2015 16:15:34 GMT
Search YouTube for the cold set method. Basically you apply the jams without heating them first, get them placed where you want them, smooth out all the wrinkles and puckers, and then heat them with a rice bag. It is so much easier to get a smooth finish and complete seal this way. (My favorite videos are the ones by BeautyandJams) I will have to try this next time! |
|
