|
|
Post by iamkristinl16 on Apr 30, 2016 15:13:16 GMT
I bought this chest at a garage sale today and want to paint and use it as a coffee table. What can I do to make the edges of the top more smooth? Any ideas on color?  |
|
|
|
Post by iamkristinl16 on Apr 30, 2016 15:13:54 GMT
 This is the top. |
|
|
|
Post by katlaw on Apr 30, 2016 15:23:06 GMT
Oh I love it. Can you sand the edges? Or add some trim pieces to the edges to cover that up. For colour I would chalk paint. Because there are so many colours and you can choose the finish you like. Check out the Annie Sloan website for ideas and there are tutorial videos you can watch on Youtube. Annie Sloan chalk paint |
|
|
|
Post by iamkristinl16 on Apr 30, 2016 15:33:48 GMT
Thanks! I have done a few projects with chalk paint and will probably do that again. I used a brand that our local craft store sells. Although, the last project I did is not wearing well. I didn't do a wax or top coat and would need to for this since it will get more use. I think it will be cute painted but of course DH thinks I am crazy.
|
|
|
|
Post by iamkristinl16 on Apr 30, 2016 15:34:41 GMT
I wasn't sure if sanding would be enough or if there is a way to replace the top veneer part?
|
|
|
|
Post by shescrafty on Apr 30, 2016 18:00:48 GMT
Looking at the chips along the edge I would use some wood filler if you wanted to look like a new were piece.
I think if you want to keep it more rustic, just sanding it should be OK. After you use chalk paint on it if you want to protect it without getting a lot of shine on it I would recommend using a spray lacquer in satin. We wanted to protect our dining room table but not make it glossy, and the lacquer was easy to spray on and dried quickly. Our neighbor across the street refinishes wooden boats and recommended the lacquer over polyurethane.
I love the chest and think it will be a great coffee table!
|
|
|
|
Post by alexa11 on Apr 30, 2016 18:27:20 GMT
Wow- that is gorgeous! I would just sand the edges and not worry about it. Please post pics when you finish it. I can never find anything good around here!
|
|
PLurker
Prolific Pea
Posts: 9,790
Location: Behind the Cheddar Curtain
Jun 28, 2014 3:48:49 GMT
|
Post by PLurker on May 1, 2016 16:26:28 GMT
I like things to show their age/character/life story so I would do the minimum. Sand any sharp edges and go form there. I actually might highlight the wear by letting the original finish be on edges and wear spots. An easy way to do that is rub Vaseline where you don't want the paint to stick then paint. When done wipe the worn areas that you put Vaseline on and the paint will come of revealing original finish. Not everyone likes that look.
I find it harder to hide the wear and age and prefer, in most cases, to highlight it. I also find it much easier than trying to make perfect again.
|
|
Deleted
Posts: 0
Sept 29, 2024 6:26:05 GMT
|
Post by Deleted on May 1, 2016 16:32:22 GMT
What a great find! I agree with chalk paint and highlighting the wear/distressed parts. I like furniture that has an history.
|
|
|
|
Post by femalebusiness on May 1, 2016 16:38:23 GMT
I am an old custom car buff and have done alot of body work in my day. I use Bondo body filler for things like that. You can buy a small can at WalMart. I have used Bondo on several wood projects where the wood was rotten. It works really well if you are going to paint. It wouldn't work as well if you were going to stain the piece.
ETA: I love that table/chest!
|
|
|
|
Post by iamkristinl16 on May 1, 2016 16:41:59 GMT
Thanks! It does make more sense to highlight the wear since it will not stay perfect for long at our house, especially if used as a coffee table (the top lifts up and has tons of storage as well, like a cedar chest). I just wasn't sure if the edges would be too sharp even with sanding. I'll just give it a try and see.
|
|
|
|
Post by cindyupnorth on May 1, 2016 16:42:48 GMT
It actually looks like there is a piece that broke off. Like it cracked on the end and they tried to peel it off? I don't think sandpaper will fix it, as you can sand the edges, but the under layer is still going to be there, as they peeled the upper layer off. Honestly, I would knock the whole top off and replace it. Either with some new wood, and painted all the same color? or go to a junk shop and find some old wood, or old cupboard door or something that would fit
|
|
Deleted
Posts: 0
Sept 29, 2024 6:26:05 GMT
|
Post by Deleted on May 1, 2016 16:50:17 GMT
I'd glue down any pieces/chips that might be falling off, paint and then put a glass or plexiglass top over it.
|
|
NoWomanNoCry
Drama Llama
Posts: 5,856 
|
Post by NoWomanNoCry on May 1, 2016 17:18:32 GMT
If it was me I would sand it down so no sharp edges but I wouldnt "fix" it because I like the distressed, beat up look. I would also used chalk paint then distress it some more.
|
|
