|
Post by scrapcat on Aug 12, 2014 15:18:01 GMT
Any recommendations where to find a good bulletin board or roll of cork?
I just re-did a piece of furniture for my scrap room and the back of it will face my work area. I want to cover it with a bulletin board or cork. Any experience with rolls of cork? Are they sturdy?
Just trying to find a good source and see what works best. Thanks!
|
|
Deleted
Posts: 0
Nov 24, 2024 14:06:15 GMT
|
Post by Deleted on Aug 12, 2014 15:31:15 GMT
The roll of cork I bought is very thin and did not hold up well for use as a cork board -- I think it was only about 1/8 of an inch thick, if that. I don't know if the rolls of cork come thicker or not. I think if it was much thicker it wouldn't really roll up, anyway!
I've seen cork squares at office supply places, Michael's, I think even our dollar store has them. Buying those to fit across your space might work much better than a roll!
|
|
|
Post by houston249 on Aug 12, 2014 16:28:52 GMT
I used a 1/4 inch cork roll on the sides of an entertainment center for my DS2. I used a roll because it was 10 dollars and the cheapest tiles I could find were 9 dollars a piece and I would have needed at least 8. I had two 18x20 inch areas to cover. In our case it was worth it for the price, perfect color cordination and texture. Sigh, I wish I had a picture for you.
It was a bit of a pain. Only spray glue worked for me for the initial stick and then elmers came into play. The stuff cracked easily. The surface, with the exception of two 1/3 inch holes was smooth. The holes did NOT effect anything, the cork when over them like butter. But a smooth surface was essential. It did turn out very well. No on could see where the cracks were and the whole family knew exactly where they had been. It really looked professional. It did hold up well through 3 military moves. The ONLY thing that marred the surface was one of our cats. Not much came off each time, but after 5 years the cork looked a bit shabby.
I feel crafty today. If you want some more ideas, I would be happy to help. Do you have a picture?
|
|
|
Post by scrapcat on Aug 12, 2014 18:59:55 GMT
Thanks for the advice on the rolls. Good to know. I was actually going to just staple gun it into the back of the furniture. It's just an old computer desk. I will see if I can find a thicker roll type or I may be able to hang an actual board...thanks!
|
|
|
Post by crazy4scraps on Aug 13, 2014 3:15:32 GMT
I need to find some cork like that. Maybe you could stack the thinner cork to make it thicker? I haven't seen it at Michael's but I honestly haven't ever looked for it there either. I bought a couple of those Just Jinger over the door storage cabinet things when they were $99 at Tuesday Morning, but the cork panel on the front is so thin the push pins barely stay stuck in! And the cork is kind of ugly. I was thinking if I could get some type of cork 1/4" thick or so and cut it to size, I could wrap it with cute fabric that coordinates with my decor and somehow adhere it over the existing cork to fit inside the wooden frame. If it wasn't so thin I would just paint the cork that's on there, but it really needs to be thicker to be useful.
I've picked up framed cork boards and white boards really cheap in the clearance section of Office Depot or Staples, but you have to hit it at the right time when they're changing a lot of things up. I scored a huge white board for my studio (like 4'x6') for around $25, and normally they are well over $100.
|
|
scrappington
Pearl Clutcher
in Canada
Posts: 3,139
Jun 26, 2014 14:43:10 GMT
|
Post by scrappington on Aug 13, 2014 10:41:51 GMT
I found amazing ones at thrift stores for a couple bucks. Check there.
|
|
scrapheart
Junior Member
Posts: 94
Jul 2, 2014 19:43:59 GMT
|
Post by scrapheart on Aug 13, 2014 10:48:33 GMT
I've found cork at Wal Mart and Staples. I've gotten a roll and some square pieces, if that helps.
|
|
|
Post by scrapcat on Aug 18, 2014 15:11:20 GMT
I just wanted to update what I did...I will try to post a pic if I remember!
I was looking into the foam board that has cork on one side but in person the cork part was very thin. I ended up buying a roll of cork from Hobby Lobby by Imagination Station. It was the thicker version they carried. I unrolled it and set it on the floor for 2 day with containers on the top to flatten it out. It was def still a little delicate and I could see where it could rip. So I got a large piece of foam board and attacked that to the back of my cabinet. The back of the cabinet was particle board that was screwed in, so my SO unscrewed the top and screwed in the foam in the same place. Then we attached the cork. Was going to use staples but didn't have ones long enough to catch the wood, so had to screw that in as well with washers.
It looks good and seems like it will hold up! Will try to post a pic this week!
Thanks for the suggestions.
|
|
Deleted
Posts: 0
Nov 24, 2024 14:06:15 GMT
|
Post by Deleted on Aug 26, 2014 21:29:04 GMT
I have some rolls of cork I just listed for sale on youtube, here's a link to my video if you are interested. Just a personal destash. Video Here
|
|