|
|
Post by Sweet Dreamer on Sept 22, 2014 17:11:35 GMT
Hi! My first post on the new site!
Just like a lot of people, I have bought so many paper trimmers in search of one that actually cuts straight and is true to size. I had a chance to briefly try out a Cutterpillar Pro this weekend. It seemed great and really sliced through chipboard. I do wish that the measurements went down to 1/8".
So, who has one and what is your opinion of it? Thanks!! |
|
|
|
Post by lynne on Sept 22, 2014 18:06:02 GMT
I have one and love it! The pros: cuts great, very accurate, and my over-40 eyes love the lighted cutting edge. Cons: takes up a lot of desk space; not so portable for crops. All in all, I love mine, but I will say I'm really struggling with the amount of space it takes up because I have precious little counter surface in my room.
Did you know that they are currently manufacturing a new, portable version? They did a kickstarter campaign in the Spring to raise funds and are projecting it to be ready by the end of the year (I think that was the last update, but someone can correct me if I'm wrong). If space & portability are important to you, you might want to wait for that new model.
|
|
Deleted
Posts: 0
Nov 25, 2024 7:40:08 GMT
|
Post by Deleted on Sept 23, 2014 11:49:33 GMT
I LOVE it. I really love the lighted cutting edge and how well it cuts. I store it underneath one of my storage units so it's easy to slide in and out to use and then put away. I chipped in during the kickstarter campaign and will be getting the new portable one too. I think I have owned every trimmer out there, and this by far is my favorite!  |
|
Deleted
Posts: 0
Nov 25, 2024 7:40:08 GMT
|
Post by Deleted on Sept 23, 2014 13:42:35 GMT
I bought the cutterpillar pro (mini size) which is supposed to start shipping this month. I believe you can pre-order it if you visit their website.
|
|
Deleted
Posts: 0
Nov 25, 2024 7:40:08 GMT
|
Post by Deleted on Sept 23, 2014 14:19:22 GMT
I bought the cutterpillar pro (mini size) which is supposed to start shipping this month. I believe you can pre-order it if you visit their website. Unfortunately they sent an update, and they won't ship until at least November now.  Hoping the date doesn't change again. |
|
|
|
Post by Sweet Dreamer on Sept 23, 2014 17:42:22 GMT
Thank you for your replies!! I am ordering the Pro today.
|
|
|
|
Post by Prenticekid on Sept 23, 2014 19:18:19 GMT
I love mine. It is quite large though. Luckily, I was able to give it a dedicated spot. It would be a pain if I had a smaller space or needed portability.
|
|
JerseyJenn
Junior Member
Posts: 70
Jun 26, 2014 2:50:47 GMT
|
Post by JerseyJenn on Sept 25, 2014 19:50:28 GMT
Did you know that they are currently manufacturing a new, portable version? They did a kickstarter campaign in the Spring to raise funds and are projecting it to be ready by the end of the year (I think that was the last update, but someone can correct me if I'm wrong). If space & portability are important to you, you might want to wait for that new model. Thanks for posting this, Lynne. I had no idea they were coming out with a portable version. It looks great! This is definitely going on my Christmas wish list. Hopefully they'll be shipping in time for Christmas! |
|
|
|
Post by artisticscrapper on Sept 26, 2014 3:55:32 GMT
I've been thinking about buying one of these. Since I don't go to crops I don't really need the portable model. They usually have a booth at Scrapbook Expo so there's a chance they'll be in Ontario CA at the upcoming show. My friend has one and she loves it.
|
|
vanillabean
New Member
Posts: 5 
|
Post by vanillabean on Sept 26, 2014 5:41:21 GMT
I also have ordered the cutter pillar crop! This is the smaller version. It looks fantastic! It's not ready to ship but I'm super excited. Am tired of buying terrible paper trimmers that have to be replaced
|
|
kitbop
Pearl Clutcher
Posts: 4,625
|
Post by kitbop on Sept 26, 2014 11:34:28 GMT
I would love one, but the size is off putting. I am constantly grabbing.my trimmer for a cut, then tucking it off to th side. It's part of my scrap process. So I'll be keeping an eye out for the portable one!
|
|
|
|
Post by Sweet Dreamer on Sept 26, 2014 23:49:10 GMT
I am so excited to receive my order! It is supposed to arrive on Tuesday. I have a feeling that I will be ordering the small one in the future. Maybe it will be a Merry Christmas To Me present!
|
|
Deleted
Posts: 0
Nov 25, 2024 7:40:08 GMT
|
Post by Deleted on Sept 27, 2014 1:49:48 GMT
I would love to hear your opinion on it when it arrives. I've been on the fence for a year now. I really want to get it!
|
|
Deleted
Posts: 0
Nov 25, 2024 7:40:08 GMT
|
Post by Deleted on Sept 27, 2014 11:06:58 GMT
Just got an update on the "Crop." Here is their expected ship date now:
"Still shooting for late December to be ready to ship. "
|
|
jediannie
Pearl Clutcher
Posts: 3,096
Jun 30, 2014 3:19:06 GMT
|
Post by jediannie on Sept 29, 2014 19:21:24 GMT
I ordered mine via their Kickstarter campaign and I'm used to many delays with Kickstarter things I've purchased, so this is totally normal. I don't know of a single company that is able to meet their deadline, especially when dealing with production in China.
|
|
Gem Girl
Pearl Clutcher
......
Posts: 2,686
Jun 29, 2014 19:29:52 GMT
|
Post by Gem Girl on Sept 29, 2014 19:36:37 GMT
I splurged on the Pro when they had that $65 promo, and I love it. I is huge, but it fits on top of my Xerox machine, so no footprint is used that wasn't hogged up already. I really wanted a heavy-duty cutter for chipboard, since I was going through Fiskars blades at a ridiculous rate while making mini albums. I still keep the little grey-and-orange Fiskars trimmer under my worktable in easy reach for paper.
|
|
|
|
Post by cmpeter on Sept 29, 2014 19:41:57 GMT
I am awaiting the smaller version (via the Kickstarter campaign) also.
|
|
plasticlight
Junior Member
Posts: 51
|
Post by plasticlight on Sept 30, 2014 17:19:35 GMT
I have the pro as well and love it - it cuts through basically anything. My only dislikes are size (which is my own fault - I knew I didn't have enough room for it when I bought it!), and the lines - if I can even explain it - the grid is in 1/2 in increments - I wish there were smaller increments If I was in the market for a portable one, I would DEFINITELY buy their new one |
|
|
|
Post by Sweet Dreamer on Sept 30, 2014 19:12:12 GMT
IT'S HERE!! Granted, I have only been using it for less than an hour but, WOW! I love it!! I can't believe how easily it cuts everything I have tried on it. And it cuts S-T-R-A-I-G-H-T!!! I am definitely going to get the portable one whenever it is available to those of us who didn't pre-order.
|
|
|
|
Post by songbird on Sept 30, 2014 20:06:18 GMT
Part of the delay with the kickstarter portable version is that they are adding metric measures to the same unit and have had some issue with the design engineers in getting that just right. I am sure it will be well worth the wait. |
|
|
|
Post by Sweet Dreamer on Oct 1, 2014 1:00:18 GMT
I have a question regarding the stick-on ruler strip that came with it. Where are you placing it on your cutter? TIA.
|
|
Hoping the date doesn't change again.
