AmeliaBloomer
Drama Llama
Posts: 6,842
Location: USA
Jun 26, 2014 5:01:45 GMT
|
Post by AmeliaBloomer on Aug 3, 2016 16:00:51 GMT
Time to summon the collective wisdom here. Also, I'm pretty sure this is non-partisan... #1: I've never seen in my life. Wood nymphs must have sneaked it into my drawer. (It's the serrated edge that's puzzling me.) #2: I USED to know its purpose. It has several blades and rolls. #3: (<--- That was supposed to be three question marks)
|
|
Deleted
Posts: 0
Jun 2, 2024 11:05:29 GMT
|
Post by Deleted on Aug 3, 2016 16:02:03 GMT
#2 looks like a herb cutter.
|
|
Deleted
Posts: 0
Jun 2, 2024 11:05:29 GMT
|
Post by Deleted on Aug 3, 2016 16:02:23 GMT
#2 is an herb mincer
#1 looks like maybe it was a tool to clean some kind of grill pan? My panini press came with something similar, but different lol
#3 ? ? ?
|
|
|
Post by elaine on Aug 3, 2016 16:04:26 GMT
1) lasagna spatula; serrated edge used to cut pieces before serving.
2) herb chopper - you roll it over herbs on a cutting board
3) no idea
|
|
Montannie
Pearl Clutcher
Posts: 3,486
Location: Big Sky Country
Jun 25, 2014 20:32:35 GMT
|
Post by Montannie on Aug 3, 2016 16:04:51 GMT
I think #1 is a cake server for a cake in a 13 x 9 pan. ETA: I like Elaine's explanation better.
|
|
AmeliaBloomer
Drama Llama
Posts: 6,842
Location: USA
Jun 26, 2014 5:01:45 GMT
|
Post by AmeliaBloomer on Aug 3, 2016 16:05:05 GMT
Actually, that was helpful. You taught me that I need to put spaces between my three question marks!
|
|
Trixie Bender
Pearl Clutcher
It's all fun and games until someone doesn't pick up on the sarcasm
Posts: 3,691
Location: Boldly going nowhere
Jun 26, 2014 11:31:57 GMT
|
Post by Trixie Bender on Aug 3, 2016 16:16:13 GMT
I owned #1 for years. I think it was some sort of serving spatula, but I never used it because it didn't bend so was awkward to use and basically useless. If anyone wants one, Salvation Army would be the place to check. I know that received like-new one a month ago.
|
|
|
Post by beanbuddymom on Aug 3, 2016 16:20:03 GMT
#1 Looks like a cake decorating spatula that makes lines along sides of cake in frosting ?
|
|
|
Post by ilikepink on Aug 3, 2016 16:21:45 GMT
#3 is perhaps a knife sharpener?
|
|
|
Post by tmarschall on Aug 3, 2016 16:23:43 GMT
The one far right is the elixir of the Gods.
|
|
|
Post by Zee on Aug 3, 2016 16:25:26 GMT
#1 Looks like a cake decorating spatula that makes lines along sides of cake in frosting ? That was my thought too, but I guess we were wrong! #3 looks so familiar, like it's a piece to something else I used to have but I can't think what. Are the teeth bendy or stiff? This one is going to bother me!
|
|
|
Post by workingclassdog on Aug 3, 2016 16:38:40 GMT
Maybe turn number 3 on the side??? #4 is the elusive Coke can..very rare, very rare indeed.
|
|
oh yvonne
Prolific Pea
Posts: 8,009
Jun 26, 2014 0:45:23 GMT
|
Post by oh yvonne on Aug 3, 2016 16:42:17 GMT
I think three might be a knife sharpener. Does it accommodate a knife in the slot?
|
|
oh yvonne
Prolific Pea
Posts: 8,009
Jun 26, 2014 0:45:23 GMT
|
Post by oh yvonne on Aug 3, 2016 16:43:32 GMT
Actually, I just looked at 3 up close and I don't think that's anything on its own. That slot on the top looks like it hooks into something mechanical. To what I don't know but I don't think it's to a kitchen gadget.
|
|
|
Post by femalebusiness on Aug 3, 2016 16:53:54 GMT
Could #3 be one of those things that you put over an egg or tomato and then cut in between the fingers to get even slices?
|
|
AmeliaBloomer
Drama Llama
Posts: 6,842
Location: USA
Jun 26, 2014 5:01:45 GMT
|
Post by AmeliaBloomer on Aug 3, 2016 16:54:13 GMT
More #3: Teeth are flexiblewith little upturned ends. Hole on top doesn't go through both layers of metal, so it would be very hard to hang on anything...but perhaps it clips onto something (between the fold of metal). Still, that seems awkward, too. ETA: Nah, not an egg slicer thingie. I know cause I found TWO of those! Zee workingclassdog oh yvonne femalebusiness
|
|
|
Post by Zee on Aug 3, 2016 16:57:42 GMT
I'm wracking my brain because those teeth look so familiar, but I just can't think where I've seen it before. I can't imagine what it goes to but I've seen it before. Had DH look just now but he doesn't know.
It will probably come to me at 3 AM...if I can even sleep at all now...Lol
|
|
|
Post by femalebusiness on Aug 3, 2016 16:59:11 GMT
More #3: Teeth are flexiblewith little upturned ends. Hole on top doesn't go through both layers of metal, so it would be very hard to hang on anything...but perhaps it clips onto something (between the fold of metal). Still, that seems awkward, too. ETA: Nah, not an egg slicer thingie. I know cause I found TWO of those! Zee workingclassdog oh yvonne femalebusiness Now this is going to bother me all day long!
|
|
oh yvonne
Prolific Pea
Posts: 8,009
Jun 26, 2014 0:45:23 GMT
|
Post by oh yvonne on Aug 3, 2016 16:59:22 GMT
I'm wracking my brain because those teeth look so familiar, but I just can't think where I've seen it before. I can't imagine what it goes to but I've seen it before. Had DH look just now but he doesn't know. It will probably come to me at 3 AM...if I can even sleep at all now...Lol OMG me too! Driving me batty!
|
|
AmeliaBloomer
Drama Llama
Posts: 6,842
Location: USA
Jun 26, 2014 5:01:45 GMT
|
Post by AmeliaBloomer on Aug 3, 2016 17:02:53 GMT
Well, geez, had I turned over #1, I would have found this:
"Copco No. 2530-54 Dishwasher Safe Melamine Max 356 F (180 C) Made in China
Googling model number gets me a couple eBay auctions where it's described as a high-temperature spatula...but they probably didn't know, either, so just used the info on back.
#2: An herb cutter. THAT'S IT! Thank you. (Hmmm...use it or donate it?)
|
|
scrappinghappy
Pearl Clutcher
“I’m late, I’m late for a very important date. No time to say “Hello.” Goodbye. I’m late...."
Posts: 4,306
Jun 26, 2014 19:30:06 GMT
|
Post by scrappinghappy on Aug 3, 2016 17:08:45 GMT
based on the side view, could #3 be a frame clip?
|
|
AmeliaBloomer
Drama Llama
Posts: 6,842
Location: USA
Jun 26, 2014 5:01:45 GMT
|
Post by AmeliaBloomer on Aug 3, 2016 17:29:04 GMT
based on the side view, could #3 be a frame clip? You mean one of those thingies you wedge between the rim on back of the frame and the backing for the art? If so, that's brilliant. Only thing is it's three inches long, so that would be a really big frame (which we don't have)...and I would have several more of them, or at least a memory of owning more. And it was in a Tupperware container with the herb slicer and a couple of sharp food processor attachments I never use. Seemed like purposeful storage...
|
|
|
Post by workingclassdog on Aug 3, 2016 18:24:13 GMT
Well, geez, had I turned over #1, I would have found this: "Copco No. 2530-54 Dishwasher Safe Melamine Max 356 F (180 C) Made in China Googling model number gets me a couple eBay auctions where it's described as a high-temperature spatula...but they probably didn't know, either, so just used the info on back. #2: An herb cutter. THAT'S IT! Thank you. (Hmmm...use it or donate it?) But it doesn't even resemble a spatula??? A piece that attaches to a spatula?
|
|
|
Post by **GypsyGirl** on Aug 3, 2016 18:32:54 GMT
#1 is a Cut 'n Serve Spatula in serrated edge. Yours just happens to be made from melamine. #3 is a stumper! My guess is you use the clips to put on the side of a pot. That would allow the lid to be raised a little bit to allow steam to escape. I sometimes us a wooden spoon handle to do something similar. If that isn't it, I have no clue!
|
|
scorpeao
Pearl Clutcher
Posts: 4,521
Location: NorCal USA
Jun 25, 2014 21:04:54 GMT
|
Post by scorpeao on Aug 3, 2016 18:51:04 GMT
You should post #3 on the subreddit Whatisthisthing
|
|
Peamac
Pearl Clutcher
Refupea # 418
Posts: 4,218
Jun 26, 2014 0:09:18 GMT
|
Post by Peamac on Aug 3, 2016 18:51:26 GMT
#3 looks vaguely familiar, like it's a part of some other kitchen equipment.
|
|
Deleted
Posts: 0
Jun 2, 2024 11:05:30 GMT
|
Post by Deleted on Aug 3, 2016 18:57:07 GMT
Could #3 be something for your kitchen cabinets/drawers or a clip for an appliance of some sort?
|
|
bethany102399
Pearl Clutcher
Posts: 3,540
Oct 11, 2014 3:17:29 GMT
|
Post by bethany102399 on Aug 3, 2016 18:59:28 GMT
I was thinking #3 is a napkin holder. or weight for a tablecloth like for outside.
|
|
Trixie Bender
Pearl Clutcher
It's all fun and games until someone doesn't pick up on the sarcasm
Posts: 3,691
Location: Boldly going nowhere
Jun 26, 2014 11:31:57 GMT
|
Post by Trixie Bender on Aug 3, 2016 19:00:07 GMT
#3 looks vaguely familiar, like it's a part of some other kitchen equipment. I agree. I keep checking back hoping someone has identified it because it's driving me crazy trying to remember where I've seen that before.
|
|
|
Post by jjpeapea on Aug 3, 2016 19:11:05 GMT
|
|