curiouscrafter
Full Member
Posts: 482
Member is Online
Jun 2, 2019 21:15:12 GMT
|
Post by curiouscrafter on Mar 25, 2020 3:39:04 GMT
When I put a stamp on my Misti, and put the paper down with magnets...ink up the stamp, press down, lift up the Misti, and the paper sticks to the stamp and I have to peel it off to get it released.
I feel it’s the stamps fault...but don’t know how to fix it from doing it. I cleaned the stamp, seasoned it...what else can I do?
Thanks.
|
|
|
|
Post by Eddie-n-Harley on Mar 25, 2020 3:57:35 GMT
I don't think you really can fix it; it happens to me all the time with my positioner, too. The ink and stamp are just really sticky.
However, while I hate this and occasionally smudge while pulling off the paper, I can usually work around it by making sure my paper is flush in the corner when I go to stamp. Then, when I have to pull the paper off and put it back, I know that if I put it back flush in the corner and stamp again, I'll get the re-stamp positioned correctly.
|
|
|
|
Post by Embri on Mar 25, 2020 6:10:47 GMT
Is your ink pad getting dry? That can increase the tackiness of the ink. Maybe try dampening the stamp by dabbing it on a moist cloth/towel before inking, though too much moisture will make the outlines bleed.
|
|
lindas
Pearl Clutcher
Posts: 4,306 
|
Post by lindas on Mar 25, 2020 15:28:44 GMT
Laminate one of your grid papers and use painters tape along with the magnets to hold your paper in place.
|
|
|
|
Post by don on Mar 25, 2020 21:10:41 GMT
I don't know what it's called, but I have a small sack I got from a SU gal a few years ago for heat embossing.
|
|
|
|
Post by artisticscrapper on Mar 29, 2020 0:36:20 GMT
I’m guessing it’s the ink. Is this happening with all your ink pads or just one brand?
|
|
FurryP
Drama Llama
To pea or not to pea...
Posts: 7,286
Site Supporter
Jun 26, 2014 19:58:26 GMT
|
Post by FurryP on Mar 31, 2020 2:45:21 GMT
It happens to me too sometimes. I just don't butt the card up to lower corner and put some painters tape both at the bottom and the top. Or magnets if they are not in the way.
|
|
|
|
Post by anniefb on Mar 31, 2020 7:10:26 GMT
Add stronger magnets like a bar magnet? Or try using a sticky mat instead of the grid paper/mouse and magnets. You could cut down a Cricut mat or similar if you have one. That's what Betsy Veldman from the Greetery does as she doesn't like using the magnets. www.youtube.com/watch?v=mvmBg71KRjk |
|
