|
|
Post by KikiPea on Oct 31, 2022 3:01:03 GMT
stamping platform anywhere anymore? I googled it, but didn’t see anything. I would so much rather have that than the small because I’d only use it for scrapbook pages. If not, I just won’t get a platform because I’d have to stamp on smaller paper, then cut it out, which I could just do with a stamping block.
Thanks!
|
|
|
|
Post by Aheartfeltcard on Oct 31, 2022 3:13:37 GMT
What size is the large one?
|
|
|
|
Post by joblackford on Oct 31, 2022 4:41:51 GMT
I ordered mine from the UK back when the lawsuit drama started, I think. Actually I think I got the small one that way after buying the big one locally before the drama. I remember it costing a fortune for shipping but being worth it. But anyway, I would suggest shopping a UK or Euro site or maybe eBay. The exchange rate will be a lot better now than back when I bought it.
|
|
|
|
Post by joblackford on Oct 31, 2022 4:42:22 GMT
What size is the large one? The stamping area is about 8.5” x 8.5” |
|
|
|
Post by CardBoxer on Oct 31, 2022 8:26:23 GMT
|
|
|
|
Post by JavaJones on Oct 31, 2022 10:47:44 GMT
I got mine from Amazon during lockdown, for about $45 or so, including shipping from the UK (like the link above). It’s a great size (8.5x8.5 inches), and I like the fact that two of the sides don’t have rails, so you can stamp on larger sizes of paper if needed.
|
|
|
|
Post by KikiPea on Oct 31, 2022 13:28:18 GMT
I looked at that one. Is that the big one? I thought he had one that was big enough for 12x12. This one is smaller than that. |
|
|
|
Post by KikiPea on Oct 31, 2022 13:29:43 GMT
What size is the large one? The stamping area is about 8.5” x 8.5” Oooh, okay. I thought the large one was 12x12. Seems his won’t work. I guess I’ll have to go with WRMK. Thanks! |
|
|
|
Post by mcjunkin on Oct 31, 2022 13:33:31 GMT
I looked at that one. Is that the big one? I thought he had one that was big enough for 12x12. This one is smaller than that. It is big enough for a 12 x 12 in that one side and the bottom are left open, with no kind of ledge or anything, so that a larger piece of paper can be used. I'm pretty sure the platform itself is not 12 x 12. |
|
|
|
Post by CardBoxer on Oct 31, 2022 13:40:32 GMT
I looked at that one. Is that the big one? I thought he had one that was big enough for 12x12. This one is smaller than that. Yes, that’s the bigger one. 12x12 can be used since two sides are open. I think “big” is just how it’s casually referred to. A smaller travel sized platform was manufactured later. If you fast forward to 8:35 in the video on Tim’s blog, below, he’s demoing using 12x12. And youtube reviews are out there too. Hope this helps! timholtz.com/the-stamp-platform/ |
|
|
|
Post by CardBoxer on Oct 31, 2022 13:44:43 GMT
I looked at that one. Is that the big one? I thought he had one that was big enough for 12x12. This one is smaller than that. It is big enough for a 12 x 12 in that one side and the bottom are left open, with no kind of ledge or anything, so that a larger piece of paper can be used. I'm pretty sure the platform itself is not 12 x 12. Was typing/finding a video while you posted, and repeated what you said. 😀 |
|
|
|
Post by janesays on Oct 31, 2022 15:04:28 GMT
I saw the 12x12 We R stamping platform at Tuesday Morning! There were three of them! $40!! I don’t know if that’s a good price but I was tempted.
|
|
|
|
Post by papersilly on Oct 31, 2022 17:06:44 GMT
i just bought one on FB marketplace. i see them posted on other reselling platforms too.
|
|
Loydene
Pearl Clutcher
Posts: 2,639 
Location: Albuquerque, New Mexico
|
Post by Loydene on Oct 31, 2022 17:30:21 GMT
I thought I'd seen it on Amazon -- within the last few months
|
|
kitbop
Pearl Clutcher
Posts: 4,442
|
Post by kitbop on Oct 31, 2022 20:47:00 GMT
I have it, and it's not large enough to stamp slimline card size stamps from pink fresh. This is a BUMMER!
But my LSS owner gave me a tip: use a cutting plate for your die cut platform (like a gemini plate or bigshot plate) and use it like you would an acrylic block. Although I'd like to use my stamping platform for these stamps, I only own 2 of them, so it's not a huge deal.
|
|
|
|
Post by Ryann on Oct 31, 2022 21:08:22 GMT
I have it, and it's not large enough to stamp slimline card size stamps from pink fresh. This is a BUMMER! But my LSS owner gave me a tip: use a cutting plate for your die cut platform (like a gemini plate or bigshot plate) and use it like you would an acrylic block. Although I'd like to use my stamping platform for these stamps, I only own 2 of them, so it's not a huge deal. This is a great tip. Thank you for sharing! |
|
PaperAngel
Prolific Pea
Posts: 7,559
Jun 27, 2014 23:04:06 GMT
|
Post by PaperAngel on Oct 31, 2022 21:35:53 GMT
Tonic/Tim Holtz stamp platforms & accessories cannot be sold via retailers in North & South Americas, per the settlement between Tonic Studios & MSP in 2018 (ETA: discussed here). They are only available via resale markets &/or retailers based in Europe & Asia. To my knowledge, only the WRMK 12x12 Precision Press fits an entire 12x12 sheet which I, who exclusively incorporates stamping into scrapping (typically words, icons, etc.), recommend. HTH. |
|
|
|
Post by tampascrapper on Nov 1, 2022 1:14:53 GMT
I got mine last year from Amazon. It was shipped from the UK but I think I got free shipping.
|
|
|
|
Post by 950nancy on Nov 1, 2022 2:23:04 GMT
Mine was a Tuesday Morning find a few years ago.
|
|
scrapnnana
Drama Llama
Posts: 6,204
|
Post by scrapnnana on Nov 1, 2022 14:22:12 GMT
If you plan to use it for scrapbooking, the one by Stampin’ Up is designed for scrapbooking, not just card making. And it’s great for layered stamps, stamping a pattern or border on a page, etc. The smaller stamp platforms are big enough for stamping on layouts, because they are open on two sides. Can you stamp the entire page at once? No. But even if the platform is big enough to stamp a 12x12 page, stamps big enough to stamp a background in one go are rare, if they even exist (probably very expensive if they do). The plates attach to two sides.
I bought the SU one for stamping backgrounds, borders, etc., on my pages.
|
|
|
|
Post by cbet on Nov 1, 2022 15:54:53 GMT
If you plan to use it for scrapbooking, the one by Stampin’ Up is designed for scrapbooking, not just card making. And it’s great for layered stamps, stamping a pattern or border on a page, etc. The smaller stamp platforms are big enough for stamping on layouts, because they are open on two sides. Can you stamp the entire page at once? No. But even if the platform is big enough to stamp a 12x12 page, stamps big enough to stamp a background in one go are rare, if they even exist (probably very expensive if they do). The plates attach to two sides. I bought the SU one for stamping backgrounds, borders, etc., on my pages. I can second the recommendation for the Stamparatus by Stampin Up. I have a bit of a collection of stamp press tools - everything except the Misti, it seems. And if I had to get rid off all of them and keep only one, the Stamparatus is the one I'd keep. Not because I'm any kind of SU fangirl, because I'm not. But with this tool, it seems that they stayed back, looked at what everyone else was coming out with, took the best of all of it and created a great tool. |
|
|
|
Post by papersilly on Nov 2, 2022 21:00:46 GMT
stamping platform anywhere anymore? there are a few well priced ones on Eb@y right now. |
|
FurryP
Drama Llama
To pea or not to pea...
Posts: 7,024
Site Supporter
Jun 26, 2014 19:58:26 GMT
|
Post by FurryP on Nov 3, 2022 1:43:17 GMT
I saw the 12x12 We R stamping platform at Tuesday Morning! There were three of them! $40!! I don’t know if that’s a good price but I was tempted. $89 regular price at Joanns $100 regular price at sb.com $129 Online at Michaels (seriously??!!!! It's plastic from China!!) |
|
|
|
Post by positivelyreek on Nov 3, 2022 12:42:50 GMT
I picked mine up from TM years ago, I have not seen any available recently. Looks like the other peas have some good recourses for you!
|
|
|
|
Post by KikiPea on Nov 3, 2022 14:23:58 GMT
Thanks, y’all! I was able to find one from a fellow pea.
Thanks for all the help! 🤗
I see there are a couple of new ones out (or coming in the future) from Sizzix and Altenew. I’m not a huge stamper, but the Sizzix one also helps hold stencils! Interesting. I’ll have to see what people think of those.
|
|
pantsonfire
Drama Llama
Take a step back, evaluate what is important, and enjoy your life with those who you love.
Posts: 5,011
|
Post by pantsonfire on Nov 3, 2022 14:51:35 GMT
Thanks, y’all! I was able to find one from a fellow pea. Thanks for all the help! 🤗 I see there are a couple of new ones out (or coming in the future) from Sizzix and Altenew. I’m not a huge stamper, but the Sizzix one also helps hold stencils! Interesting. I’ll have to see what people think of those. I posted about the Sizzix one today. It is 9x14 so easier for those who do 12x12 layouts. So far it seems there are no edges like on the TH platform (I have his). |
|
[/URL]
