|
|
Post by gale w on Mar 3, 2018 0:27:41 GMT
Anyone else get theirs? I need to clean up my room so I can try it out. It's smaller than I thought it would be. Here's a side by side comparison with the TH positioner. Attachments:
|
|
FurryP
Drama Llama
To pea or not to pea...
Posts: 7,287
Site Supporter
Jun 26, 2014 19:58:26 GMT
|
Post by FurryP on Mar 3, 2018 0:36:20 GMT
How exciting for you! Is it big enough to hold a 5x7 card? I am thinking not, by the looks of your picture.
|
|
|
|
Post by gale w on Mar 3, 2018 0:39:42 GMT
It will. The base where you put your card is about 7-3/8" square. Also, two sides are open.
|
|
GiantsFan
Prolific Pea
Posts: 8,510
Site Supporter
Jun 27, 2014 14:44:56 GMT
|
Post by GiantsFan on Mar 3, 2018 1:09:33 GMT
Looking forward to hearing your review.
|
|
|
|
Post by gale w on Mar 3, 2018 1:48:13 GMT
Just tried one large stamp that would not stamp well on the TH platform no matter what I tried. It stamps better in the stamparatus but unfortunately even better in the misti. lol
|
|
|
|
Post by woodysbetty on Mar 3, 2018 13:41:08 GMT
Wow...I was afraid it would be too big!! Can't wait to hear your review!!
|
|
|
|
Post by riley on Mar 3, 2018 17:32:04 GMT
Hopefully it’s lighter weight than the TH. Looks like a manageable size. Hope to hear a review. Tell us if it seems sturdy and gives an accurate restamp.
|
|
|
|
Post by anniefb on Mar 3, 2018 19:28:27 GMT
Let us know what you think!
|
|
scrappermcg
Junior Member
Posts: 88 
|
Post by scrappermcg on Mar 3, 2018 20:07:41 GMT
I got mine too! I don't think it would survive "CPR" stamping like TH Platform. Time will tell if the hinges will last (which are more sturdy than the Misti), it's all plastic and lighter than TH. I am being cautious when pressing on it. The one difficult stamp (bare rubber) I have is difficult on all the stamp tools.
Overall I like the design and size. It stamps okay for me, not any better than TH, but it's still new and I haven't used it enough to decide if it's my favorite.
|
|
|
|
Post by marg on Mar 3, 2018 22:22:28 GMT
I got mine too! I don't think it would survive "CPR" stamping like TH Platform. Time will tell if the hinges will last (which are more sturdy than the Misti), it's all plastic and lighter than TH. I am being cautious when pressing on it. The one difficult stamp (bare rubber) I have is difficult on all the stamp tools. Overall I like the design and size. It stamps okay for me, not any better than TH, but it's still new and I haven't used it enough to decide if it's my favorite. On Splitcoaststampers, demonstrators were saying that it won't stamp well in the corner - do you find this to be the case? They were putting foam pads/shims underneath to get it to stamp half decently. I prefer stamping in the corner so I'm a little worried - I'm one of the second round of orders that will go out, I believe later this month. My TH platform doesn't stamp well at all, so I'm worried about buying another platform that won't stamp in the corner. SaveSave |
|
scrappermcg
Junior Member
Posts: 88
|
Post by scrappermcg on Mar 4, 2018 19:33:50 GMT
I got mine too! I don't think it would survive "CPR" stamping like TH Platform. Time will tell if the hinges will last (which are more sturdy than the Misti), it's all plastic and lighter than TH. I am being cautious when pressing on it. The one difficult stamp (bare rubber) I have is difficult on all the stamp tools. Overall I like the design and size. It stamps okay for me, not any better than TH, but it's still new and I haven't used it enough to decide if it's my favorite. On Splitcoaststampers, demonstrators were saying that it won't stamp well in the corner - do you find this to be the case? They were putting foam pads/shims underneath to get it to stamp half decently. I prefer stamping in the corner so I'm a little worried - I'm one of the second round of orders that will go out, I believe later this month. My TH platform doesn't stamp well at all, so I'm worried about buying another platform that won't stamp in the corner. SaveSaveNo it doesn't, it's to close to the hinges. The only one that could stamp well in corners was the (old) WRMK one because the hinges lifted. On the stamparatus it's easier to move your card stock away from the hinges to stamp though. |
|
|
|
Post by artisticscrapper on Mar 4, 2018 20:16:01 GMT
I watched a demo and even in that the when demonstrator placed her cardstock in the corner she had to re-ink and stamp the image again.
I’m interested in how well it works for layered stamps and whether it’s easy to move the plates lower on the hinges to repeat images in different spots. Have you gotten a chance to try yet?
|
|
|
|
Post by gale w on Mar 4, 2018 21:06:57 GMT
I did have to restamp once or twice on solid stamps but the multiple plates make layered stamping so easy. You could do up to 4 layers since you can use either side of the plates. That alone makes it worth it to me. I'll take some in-process pics when I get a chance.
|
|
|
|
Post by gale w on Mar 7, 2018 3:48:18 GMT
Here are a couple of images. I used my old magnets (they are thinner) and as you can see, the image was right up at the corner-I had the paper in the corner of the stamparatus. The first stamping was light but I don't think that's the fault of the stamparatus since it was even all over. I just think these photopolymer stamps are hard to get a good impression with dye ink., especially when they're new. After the 2nd stamping the image is pretty solid and smooth. I used Gina K ink cubes and this is a photopolymer stamp from mft.  |
|
|
|
Post by gale w on Mar 7, 2018 3:55:50 GMT
For a comparison, these stamps were stamped with the tim holtz positioner. One is a larger version of the stamp above (same set). The other one is from altenew, I believe. Both photopolymer, stamped with Stampin Up dye ink. At the time I stamped these I was trying to compare the old TH platform with the replacement one Tonic sent me. On the right is the MISTI. This was before I had the stamparatus. I did stamp the same stamp (the MFT one) with the stamparatus and there were no voids.  |
|
|
|
Post by scraphappyinjax on Mar 7, 2018 23:46:59 GMT
I got mine last week and absolutely love it! The size is perfect and think my customers are going to love it too!!
|
|
|
|
Post by binkiemonstermom on Mar 8, 2018 18:08:57 GMT
Not stamping well in the corner is killing it for me. I want to like it but I feel like the corner issue, for me, is a big deal.
|
|
|
|
Post by gale w on Mar 8, 2018 19:17:44 GMT
Do you have one yet? The corner stamps fine for me.
|
|
|
|
Post by riley on Mar 9, 2018 2:06:38 GMT
If you already have a couple or three stamp positioners in various sizes that work, would you still get this one? If the image is better near the hinges than say near the Misti bumpers or you don’t like the TH I get it. If you like what you have, are there things about this that add value? I’m not against getting it but I would want it to be better than what I already have.
|
|
|
|
Post by gale w on Mar 9, 2018 4:21:07 GMT
For me it's the multiple plates. That adds enough value even though I have a misti and a th platform.
|
|
Deleted
Posts: 0
Nov 25, 2024 20:27:43 GMT
|
Post by Deleted on Mar 9, 2018 15:29:09 GMT
 Not Stamparatus related (although interested) I stamped these Bunnies with a We R Memory Keepers stamp platform. The stamp is from SU and is 3 step process using Dark to Light inks to get image. I like my We R Memory Keepers stamp platform, however, I am looking at a 12" x 12" platform for scrapbooking. |
|
|
|
Post by riley on Mar 10, 2018 17:28:30 GMT
For me it's the multiple plates. That adds enough value even though I have a misti and a th platform. I appreciated you showing the images and the size. I like that it’s a little smaller than the TH and not quite as heavy. I agree that the extra plates are a good feature, and for me that it stamps well near the hinges is important. Even when you can stamp multiple images if it does not stamp fairly evenly the ink is darker in some places and that’s not a good look. |
|
scrapnnana
Drama Llama
Posts: 6,451
|
Post by scrapnnana on Mar 10, 2018 20:51:19 GMT
If you already have a couple or three stamp positioners in various sizes that work, would you still get this one? If the image is better near the hinges than say near the Misti bumpers or you don’t like the TH I get it. If you like what you have, are there things about this that add value? I’m not against getting it but I would want it to be better than what I already have. I only have the Tim Holtz stamp platform, but it stamps well for me. I do like the idea of multiple plates, but I am not sure I really need to buy another platform. I don't often do assembly line stamping, although I do like the layered stamps and have several. Muliple plates would be nice. I guess the price and availability would be a factor. The last I heard, they were only available to a limited number of people, and if you did not order in time, you were just out of luck. Are they generally available now, or is it still limited? |
|
|
|
Post by riley on Mar 14, 2018 3:29:45 GMT
Deleted
|
|
scrappyesq
Pearl Clutcher
You have always been a part of the heist. You're only mad now because you don't like your cut.
Posts: 4,063
|
Post by scrappyesq on Mar 14, 2018 20:12:15 GMT
OOOOH thanks for the images!
|
|
|
|
Post by scraphappyinjax on Mar 25, 2018 22:06:33 GMT
Not stamping well in the corner is killing it for me. I want to like it but I feel like the corner issue, for me, is a big deal. I had a customer reach out to me because she was experiencing same issue. I showed her how I used 2 shims (cardstock I had laying around) and now the image stamps perfectly. |
|
|
|
Post by marg on Mar 25, 2018 23:43:57 GMT
If you already have a couple or three stamp positioners in various sizes that work, would you still get this one? If the image is better near the hinges than say near the Misti bumpers or you don’t like the TH I get it. If you like what you have, are there things about this that add value? I’m not against getting it but I would want it to be better than what I already have. I only have the Tim Holtz stamp platform, but it stamps well for me. I do like the idea of multiple plates, but I am not sure I really need to buy another platform. I don't often do assembly line stamping, although I do like the layered stamps and have several. Muliple plates would be nice. I guess the price and availability would be a factor. The last I heard, they were only available to a limited number of people, and if you did not order in time, you were just out of luck. Are they generally available now, or is it still limited? I believe they're supposed to be available in the new catalogue. The ones being shipped now are from a special pre-order period before Christmas. SaveSave |
|
|
|
Post by scraphappyinjax on Mar 26, 2018 0:13:34 GMT
I only have the Tim Holtz stamp platform, but it stamps well for me. I do like the idea of multiple plates, but I am not sure I really need to buy another platform. I don't often do assembly line stamping, although I do like the layered stamps and have several. Muliple plates would be nice. I guess the price and availability would be a factor. The last I heard, they were only available to a limited number of people, and if you did not order in time, you were just out of luck. Are they generally available now, or is it still limited? I believe they're supposed to be available in the new catalogue. The ones being shipped now are from a special pre-order period before Christmas. SaveSaveYes, that's correct. We had a pre-order in October and November 2017. When the 2018 Annual Catalog launches in June, you'll be able to order a Stamparatus. |
|
|
|
Post by riley on Mar 27, 2018 18:44:38 GMT
My craftiest friend received her Stamparatus last week. She says she gets a pretty poor image in the corner and has to use CPR pressure and stamp multiple times. She has several Mistis and a TH tool. She feels she gets better results with her Mistis and her TH but she likes the double door feature. I’ve decided to pass on this version.
|
|
|
|
Post by gale w on Mar 27, 2018 18:49:48 GMT
Just saw a thread in a fb group where some are having trouble and some are not. Kind of like the TH tool. I know a lot of people had trouble with it and a lot didn't. I did and got a replacement but it was the same. It works fine for small things, but not big stamps so I just use three different positioners. lol
|
|
